Vszerda SFF-8643 to 4 SATA breakout cable 3.3ft
Connects a single SFF-8643 Mini-SAS HD port to four SATA drives at 6 Gb/s per lane using 30 AWG braided cable with locking latches
- Rated speed6 Gbit/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack, Blue
- Overall length3.3
- Key featuresSff-8643 to sata, sff-8643 to sata, mini sas hd to sata
- Connects one SFF-8643 controller to four SATA drives
- 6 Gbps per drive for reliable data transfer
- Locking latches on both ends secure the link
- Thin 30 AWG braided cable simplifies routing inside the case
- 3 ft length suits short and long chassis builds
SFF-8643 breakout for four SATA drives
This 3.3ft cable splits a single internal Mini-SAS HD SFF-8643 male connector into four SATA 7-pin female ports. It links a 12Gbps SAS HBA or RAID controller to up to four SATA hard drives or SSDs. Each lane runs at 6Gbps. The 30 AWG conductors are copper and wrapped in a braided sleeve for easier routing.
Replaces bulky multi-cable looms
One SFF-8643 host port replaces four separate SATA cables from the controller, cutting clutter inside dense chassis. The forward breakout design is intended for controller-to-drive connections, not backplane-to-backplane links. Locking latches on both ends prevent accidental unseat during drive swaps or vibration.
Suits storage builders using SAS controllers
Ideal for DIY NAS or server builds that need to fan out a high-density SAS port to discrete SATA targets. Not for setups that require a Mini-SAS HD receptacle on the backplane side. Buyers needing longer runs or different breakout counts should look at other lengths or pin-outs.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | HD MINISAS-004 |
| Product type | Mini-SAS Cables |
| Product color | Black, Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How much clearance does the SFF-8643 connector with its locking latch need behind the controller?
The SFF-8643 male plug includes a locking latch that adds depth; allow extra space behind the RAID controller or motherboard port so the latch can engage fully without pressing against the chassis wall.
Which end do I plug in first when installing this breakout cable?
Connect the SFF-8643 male host end to the controller or motherboard first, listening for the latch click, then attach the four SATA 7-pin female plugs to the drives or backplane.
When should I replace the cable if I rebuild the array with new drives?
Replace the cable if the 30 AWG conductors show kinks, the braided sheath is frayed, or the locking latches on either the SFF-8643 or SATA ends no longer snap securely.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





