Vszerda SFF-8643 to SFF-8643 Internal SAS Cable 50cm
Internal 50 cm Mini SAS HD SFF-8643 cable links a SAS/SATA adapter to a backplane at 6 Gb/s
- SFF-8643 connectors support 6 Gb/s SAS 2.1 links
- Ready for future 12 Gb/s SAS 3.0 specification
- 50 cm length fits compact server chassis
- Connects SAS/SATA adapter to backplane directly
- High-density x4 interface handles four lanes per port
Internal SAS 3.0 Cable for Server Storage
This Vszerda cable carries a Mini SAS HD SFF-8643 connector at each end. It links a SAS or SATA adapter to a SAS or SATA backplane inside a server or storage chassis. The 50cm length suits typical internal routing between adjacent drive bays and controller cards.
Simple Push-Fit Installation with Fixed Length
Both ends use the same high-density latch mechanism, so the cable clicks into place without tools. The fixed 50cm run cannot be shortened or extended, so measure the adapter-to-backplane path before fitting. Excess slack may block airflow in dense enclosures, while a shortfall leaves the link unmade.
6 Gb/s Today with 12 Gb/s Connector Headroom
The SFF-8643 interface meets the SAS 2.1 specification at 6 Gb/s per lane. The same connector family is defined for the SAS 3.0 standard at 12 Gb/s, though cable material may change. Buyers needing longer runs or external bulkhead connections cannot use this internal assembly.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the SFF-8643 cable is passing data at 6Gb/s after connecting my SAS adapter to the backplane?
Check the adapter BIOS or OS disk utility for negotiated link speed; the HD Mini-SAS SFF-8643 connectors meet the SAS 2.1 standard for 6Gb/s operation.
What comes in the box and do I need separate brackets or screws to mount the cable?
The package contains only the 50cm internal Mini SAS HD SFF-8643 to SFF-8643 cable; no brackets, screws or additional adapters are included.
Should I choose this 50cm version or a different length for a typical server chassis?
The 50cm length suits most internal adapter-to-backplane runs; select a longer cable only if the routing distance exceeds 50cm.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





