Vszerda SFF-8644 to 4 SATA 7 Pin Cable 3.2 ft
Connects a Mini SAS HD SFF-8644 host port to four SATA drives at up to 6 Gb/s
- Rated speed6 Gbit/s
- Connector detailsSff-8644 to 4xsata
- Connector genderMale-to-Male
- Conductor typeLead
- Product typeMini SAS
- Overall length3.2 ft (0.98 m)
- Connects HBA card to four SATA drives via SFF-8644 36-pin interface
- Supports 6 Gb/s data rate compliant with SAS 2.1 specification
- Woven mesh sheath and locking latches maintain airflow inside chassis
- 2 ft length suits typical server and workstation layouts
- Male-to-male terminals ready for direct drive attachment
SFF-8644 to Four SATA Cable
The Vszerda SFF-8644 to 4 SATA 7 Pin Cable connects a host bus adapter with a Mini SAS HD SFF-8644 36-pin port to up to four SATA hard drives or SSDs. It carries a 6 Gb/s data rate and meets SAS 2.1 compliance. The 3.2 ft length suits server and workstation chassis routing. A woven mesh sheath and locking latches reduce airflow obstruction and support continuous 24/7 operation.
Suits HBA-to-drive fan-out.
Builders wiring an HBA or RAID card to multiple SATA drives will use this cable. It is not for connecting drives directly to a motherboard SATA header, nor for setups that need an internal SATA-to-SATA link. The male-to-male Mini SAS HD to four SATA fan-out serves backplane-to-drive or card-to-drive topologies only.
6 Gb/s SAS 2.1 data rate
The cable is specified for up to 6 Gb/s throughput under the SAS 2.1 standard. This single figure determines whether the link matches the speed of the drives and controller in the build.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Heretom |
| Model name | 699910690960 |
| Product type | Mini SAS |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sff-8644 to 4xsata |
| Connector gender | Male-to-Male |
| Size & build | |
| Overall length | 3.2 ft (0.98 m) |
| Conductor type | Lead |
Questions about this item
Should I choose the 3.2 ft or 3.3 ft length for my server build?
Both figures refer to the same 1 metre cable; 3.2 ft is the rounded value used in the specifications, while 3.3 ft appears in the product title.
What does the 6 Gb/s speed rating deliver when the cable is connected to my HBA card?
It supports SAS 2.1 signalling at up to 6 Gb/s per lane, giving each of the four SATA drives full 6 Gb/s bandwidth when the host controller and drives also operate at that rate.
How does the SFF-8644 interface limit performance compared with a direct SATA connection?
The SFF-8644 36-pin connector carries four 6 Gb/s lanes, so it does not cap throughput below what each SATA drive can use; the practical limit remains the 6 Gb/s per port defined by the SAS 2.1 standard.
More in SATA & eSATA Drive Cables
Similar items
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
2-Power ST345AP SATA to USB Type-A Cable 1.8 in Red
- 1.8 in (4.57 cm)
- Type
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





