Vszerda SFF-8644 to SFF-8644 SAS 3.0 cable 12Gbps 0.5m
A 0.5 m SFF-8644 to SFF-8644 SAS 3.0 cable delivering 12 Gbps full-duplex links between controllers and external storage
- Rated speed12 Gbit/s
- Connector detailsSff-8644 to Sff-8644
- Connector genderMale-to-Male
- Conductor typeMetal
- Product typeExternal Copper SAS Cable
- Product colorSFF-8644 to SFF-8644
- 12 Gbps throughput with SAS 3.0 compliance
- 5 m length suits tight rack spaces
- SFF-8644 male connectors link HBAs to JBODs
- AWG30 twinaxial pairs reduce signal skew
- Die-cast zinc shells with dust caps protect ports
External SAS 3.0 cable 0.5 m
This half-metre SFF-8644 to SFF-8644 cable carries 12 Gbps full-duplex SAS 3.0 traffic between a RAID controller or HBA and an external JBOD or drive enclosure. Die-cast zinc shells with protective caps shield the connectors from dust and damage.
Suits rack-mounted storage links.
Builders wiring a server to an adjacent shelf or direct-attached array will appreciate the short length and pull-tab release. Installations that need more reach or internal backplane headers should choose a different cable.
12 Gbps SAS 3.0 over SFF-8644
The cable meets SAS 2.1 and 3.0 specifications using AWG30 twinaxial pairs at 100 ohms, so the 12 Gbps rating is the single figure that confirms it matches your controller and enclosure ports.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $26.99
- Pricier than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Ipolex |
| Model name | CAB-8644/8644-P0.5M-1pc |
| Product type | External Copper SAS Cable |
| Product color | SFF-8644 to SFF-8644 |
| Performance | |
| Rated speed | 12 Gbit/s |
| Ports & slots | |
| Connector details | Sff-8644 to Sff-8644 |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Metal |
Questions about this item
How do I connect the SFF-8644 connectors to my HBA and JBOD, and what step is often missed?
Align the male SFF-8644 plugs with the controller and enclosure ports, then push until the latch clicks; the step often missed is removing the protective caps from the die-cast zinc housings before insertion.
What maintenance or replacement will this 0.5m SAS 3.0 cable need over time?
Inspect the pull tabs and metal shells for bent latches or dust buildup; replace the cable if the 100 Ohm twinaxial pairs show signal degradation or the connectors no longer latch securely.
What limit appears first when running sustained 12Gbps transfers over this 8-pair AWG30 cable?
The 0.5 metre copper reach is the first limit; beyond this length signal skew and attenuation rise, so longer runs require active optics or lower speeds.
More in SATA & eSATA Drive Cables
Similar items
eshinreal PCIe 4.0 SlimSAS 4i SFF-8654 to U.2 SFF-8639 Cable 70cm
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





