Vszerda SlimSAS 8i SFF-8654 to 8X Latching SATA Cable 50cm
Connects a SlimSAS 8i SFF-8654 port to eight latching SATA drives using a 50 cm, 28 AWG PVC cable
- Rated speed1 Gbit/s
- Connector genderMale-to-Male
- Conductor typePVC
- Overall length1.6 ft (0.49 m)
- Key featuresCompact
- Connect up to eight SATA drives with one SlimSAS 8654 port
- 28AWG copper conductors ensure reliable data transfer
- Latching SATA connectors lock securely to each drive
- 50cm length fits tidy server and storage builds
- Low-profile SlimSAS design saves space in dense chassis
SlimSAS 8i SFF-8654 to 8X SATA Cable
This 50 cm cable connects a single SlimSAS 8i SFF-8654 port to eight latching SATA connectors. It is built for servers and storage systems that need to break out one high-density link into multiple drive connections. The low-profile plug saves space in dense chassis while the latch secures the link against vibration. It suits administrators adding internal drive bays to a backplane or HBA.
Suits builders wiring eight SATA drives from one
The male-to-male design links a controller or backplane directly to SATA hard drives or SSDs. It is not for users who need an eSATA bracket for external enclosures or who require a straight-through SATA-to-SATA lead. The 1.6 foot length only reaches devices inside the same chassis, so rack-to-rack runs need a different cable.
28AWG copper conductors with PVC jacket
The cable uses 28 AWG copper wires wrapped in a polyvinyl chloride sheath for flexibility and durability. This construction supports the stated 1 Gbps data rate per lane with minimal signal loss across the 50 cm run. The eight separate SATA ends each carry a standard 7-pin signal connection to the attached drives.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $38.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Micro SATA Cables |
| Performance | |
| Rated speed | 1 Gbit/s |
| Ports & slots | |
| Connector gender | Male-to-Male |
| Size & build | |
| Overall length | 1.6 ft (0.49 m) |
| Conductor type | PVC |
Questions about this item
How do I connect the SFF-8654 SlimSAS end to my backplane without damaging the latch?
Align the straight SlimSAS 8i connector with the port, press evenly until the latch clicks, then pull gently to confirm it is seated; forcing the latch sideways can bend the internal pins.
Will the PVC jacket or 28AWG conductors degrade and need replacement under normal server use?
The PVC jacket resists abrasion and the 28AWG copper conductors are rated for continuous operation; replacement is only needed if the cable is kinked, cut or the latch mechanism breaks.
At what point does the 1 Gbps per lane limit become a bottleneck during sustained multi-drive transfers?
Each of the eight SATA lanes is capped at 1 Gbps, so aggregate throughput saturates when combined drive traffic exceeds that per-lane ceiling, showing up as queue depth growth on the host controller.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Zebra 25-66431-01R 1.05 ft eSATA cable
- 1.05 ft (0.32 m)
- Data Transfer Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Lemonra 5 Port Non-RAID SATA III 6GB/s JMB585 adapter card
- System Requirements…
- Black





