Vszerda U.2 SFF-8639 NVME PCIe SSD Male to Female Extension Cable 50cm
Extends a U.2 NVME PCIe SSD connection with a 68-pin male-to-female cable measuring 50 cm and supporting up to 4 GB/s data transfer
- Extends U.2 NVMe SSD reach with 50 cm cable
- Supports PCIe 2.0 speeds up to 2 GB/s
- Supports PCIe 3.0 speeds up to 4 GB/s
- 68-pin SFF-8639 male-to-female connectors ensure secure fit
- Enables flexible NVMe drive placement inside chassis
U.2 NVMe Extension Cable 50cm
This Vszerda cable extends a U.2 SFF-8639 connection by 50 centimetres. It features a 68-pin male connector on one end and a matching female connector on the other. The assembly is designed for NVMe PCIe SSDs that use the U.2 form factor. It provides a direct link between the drive and the host interface.
Straightforward U.2 cable installation
Connection is a simple push-fit of the male plug into the host port and the female receptacle onto the SSD. The 68-pin SFF-8639 interface is keyed to prevent misalignment during mating. The main risk is applying excessive side load to the connectors while routing the 50cm length inside a chassis. Secure the cable run to avoid stress on the solder joints.
PCIe 2.0 and 3.0 bandwidth limits
The cable supports data rates up to 2 GB/s with PCI Express revision 2.0 and up to 4 GB/s with revision 3.0. Actual throughput depends on the host controller and the SSD capabilities. The U.2 SFF-8639 standard does not carry PCIe 4.0 or 5.0 signalling. Builders needing higher bandwidth must use a different interconnect technology.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $38.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the Vszerda U.2 SFF-8639 NVMe PCIe SSD extension cable is functioning correctly after connecting it?
Confirm the host detects the NVMe drive at full PCIe 2.0 or 3.0 speeds and that data transfers reach up to 2 GB/s or 4 GB/s respectively without errors.
What does the package contain and are any additional parts required to use the 68-pin male-to-female U.2 extension?
The box includes the 50 cm SFF-8639 cable only; no extra components are needed if your system and drive both provide standard U.2 68-pin ports.
Should I choose a different length or pin-count version of this Vszerda U.2 cable for my NVMe SSD?
This model is offered solely as a 50 cm, 68-pin male-to-female extension; other lengths or pin configurations are not available for this product.
More in SATA & eSATA Drive Cables
Similar items
Zebra 25-66431-01R 1.05 ft eSATA cable
- 1.05 ft (0.32 m)
- Data Transfer Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





