Vszerda U3-067/SA-169 CFast to SATA adapter with USB 3.0 cable
Connects CFast cards to SATA or USB 3.0 ports for 2.5-inch drive bay compatibility
- Connector detailsUSB 3.0
- Conductor typeCopper
- CFast cards fit any 2.5" drive bay
- Read and write CFast Type I through SATA or USB 3.0
- Hot-swap supported on compatible SATA or USB ports
- Works with Windows, macOS and Linux without drivers
- Copper conductor carries data and power in one cable
CFast to SATA adapter for 2.5" bays
This adapter accepts any capacity CFast card and presents it as a standard 2.5 inch SATA drive. It connects through a 22 pin SATA interface or the included USB 3.0 cable. The unit is operating system independent and requires no driver installation. The CFast card and hard drive are not included.
Sustained operation via SATA or USB 3.0
The adapter reads and writes CFast type I media through whichever host port is used. Hot swap is supported when the host SATA or USB port provides that capability. Copper conductors carry data and power without active cooling. Performance scales with the host interface and the inserted card rather than the adapter itself.
Check host port and card type before ordering
Verify that the system has a free 22 pin SATA connector or a USB 3.0 port for the supplied cable. The bay must accept a 2.5 inch form factor device measuring 3.94 by 3.94 by .39 inches. Only CFast type I cards are supported; other card formats will not fit.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $21.99
- Pricier than about 78% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Chenyang |
| Model name | U3-067/SA-169 |
| Ports & slots | |
| Connector details | USB 3.0 |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How much power does the U3-067/SA-169 adapter draw when a CFast card runs all day?
The adapter itself has no active electronics, so it adds no measurable power draw; only the CFast card and the host SATA or USB 3.0 port determine consumption.
What host connector must my computer provide for this adapter to work?
A standard 22-pin SATA data-plus-power port or a USB 3.0 Type-A port using the supplied cable.
Will the adapter work with my older SATA II motherboard port?
Yes, the SATA interface is backward compatible, so the adapter functions at SATA II speeds when plugged into an older port.
More in SATA & eSATA Drive Cables
Similar items
SXDOOL SATA cable for ThinkPad T470 T480 A485 475 0UR495
- Case Fan Accessory
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Pagaloce SATA to USB 3.0 & Type-C Adapter Cable 1m Grey
- Sata, Usb Type C
- Male-to-Male





