Wilfly MP2428 2x Molex to 2x PCIe 8-pin internal power cable
Adapts two Molex connectors to two PCIe 8-pin (6+2) plugs using 100 % copper wire, 150 mm and 210 mm lengths, UL certified and RoHS compliant
- Cable length150 mm/210 mm (6 in/8 in)
- First connector2 X Molex 4pin male
- Second connector2 X PCI-E 8Pin (6Pin + 2Pin) male
- Connector count4
- Converts dual Molex into two PCIe 8-pin connectors for graphics cards
- 150 mm and 210 mm lengths fit various chassis layouts
- 100 % copper conductors ensure reliable power delivery
- UL certified and RoHS compliant for safety and environmental standards
- Four connectors total simplify multi-GPU or accessory setups
Dual Molex to Dual PCIe Adapter
The Wilfly MP2428 cable converts two Molex 4-pin connectors from a power supply into two PCIe 8-pin (6+2) connectors for graphics cards. It measures 150 mm on one branch and 210 mm on the other. The cable uses 100 % copper conductors and carries UL certification with RoHS compliance.
Suits PSUs lacking native PCIe plugs
Builders upgrading a graphics card on an older or entry-level power supply can add the required 8-pin connectors without replacing the unit. It is not for systems that already provide enough native PCIe cables or for power supplies without spare Molex leads.
Two 8-pin outputs from two Molex inputs
Each branch delivers a single 8-pin (6+2) connector, so the pair supports one dual-8-pin card or two single-8-pin cards. Total current capacity is limited by the Molex source and the 150 mm/210 mm wire lengths; high-draw cards exceeding the PSU's Molex rating should use native PCIe cables instead.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 95% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Ports & slots | |
|---|---|
| First connector | 2 X Molex 4pin male |
| Second connector | 2 X PCI-E 8Pin (6Pin + 2Pin) male |
| Connector count | 4 |
| Size & build | |
| Cable length | 150 mm/210 mm (6 in/8 in) |
Questions about this item
Does my power supply need spare Molex 4-pin connectors to run this cable?
Yes — each PCIe 8-pin (6+2) connector on the cable draws power from a Molex 4-pin male plug, so you need two free Molex outputs on the PSU.
Will the 6+2 pin ends fit an older graphics card that only takes a 6-pin PCIe connector?
The 2-pin section slides off the 6-pin body, letting the same connector mate with a 6-pin socket on an older card.
How can I confirm the cable is delivering power correctly after I plug it in?
The graphics card’s power LEDs should light and the system should POST normally; if the card shows no lights or the PC fails to start, reseat both Molex and PCIe ends.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-S6800-6IN 6.1" Molex to 2 x SATA 15-pin internal power cable
- 6.1 in (15.5 cm)
- 1x Molex LP4 male
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Dimastech BT111 Black & Red Switch Cables 600mm 2-Pin I/O
- 1.97 ft (0.6 m)





