WRIARICH USB 3.0 to SATA Adapter Cable .5M Black
Connects 2.5-inch SSDs and 3.5-inch HDDs up to 18 TB via USB 3.0 at 5 Gbps with UASP acceleration, includes LED status and auto-sleep, requires separate 12 V power for 3.5-inch drives
- Cable length0.5M
- Connector details1 x USB 3.0 to 1 x SATA
- Connector genderMale to Female
- Product colorBlack
- Key featuresThe usb 3.0 to SATA converter is widely compatible with Wind
- Connect 2.5" SATA SSD or HDD without an enclosure — just plug and play
- Transfer data at up to 5 Gbps with UASP acceleration — 70% faster reads and 40% faster writes on UASP hosts
- Works with Windows 11, 10, 8.1, 7, Vista, XP, Mac OS 9, 10, 11, Linux and Chrome OS
- Supports 3.5" HDD up to 18 TB with 12 V 2 A power adapter — not included
- Blue LED shows activity and adapter auto-sleeps after 3 minutes to save power
SATA Drive Adapter with USB 3.0
This cable connects a 2.5" or 3.5" SATA hard drive or SSD to a USB-A port on a laptop, desktop, tablet or router. It supports drives up to 18TB and works with Windows, macOS, Linux and Chrome OS without installing drivers. A separate 12V power adapter is required for 3.5" drives and is not included.
Sustained Transfer with UASP
The adapter reaches 5 Gbps and supports UASP and TRIM for faster sustained throughput. When the host also supports UASP, reads run 70% faster and writes 40% faster than standard USB 3.0. The connection falls back to USB 2.0 or 1.1 where needed. Actual speed depends on the drive and host capabilities.
Low-Power Sleep and Status LED
A blue LED shows activity and the adapter enters sleep mode after three minutes of inactivity to reduce power draw. The short 0.5 m cable keeps the setup tidy and limits voltage drop. No fan or active cooling is present, so operation stays silent.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
| Ports & slots | |
| Connector details | 1 x USB 3.0 to 1 x SATA |
| Connector gender | Male to Female |
| Size & build | |
| Cable length | 0.5M |
Questions about this item
Does the adapter run hot or make noise when transferring data continuously?
The adapter has a blue LED indicator and an auto-sleep feature that activates after 3 minutes of inactivity to reduce energy consumption, with no moving parts to generate noise.
What separate power source is required to use a 3.5-inch hard drive with this adapter?
A 12V/2A DC power adapter is required for 3.5-inch HDDs and is not included; the adapter provides a reserved DC-Jack port for this connection.
Will this adapter work with my older 3.5-inch SATA hard drive that uses an earlier SATA revision?
Yes, it supports 3.5-inch HDDs up to 18TB and is compatible with SATA III, II, and I drives, connecting via USB 3.0 or backward compatible USB 2.0 and 1.1 ports.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





