BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Expands a 2.4 printer with four fan ports, two temperature inputs and an RGB connector on a black ABS board measuring 100 by 24 by 17 mm
This expansion board is designed for owners of 2.4 series printers who run Klipper firmware and need additional I/O. It adds four fan ports, two thermistor inputs and one RGB connector to the existing control electronics. The board targets enthusiasts and professionals who want finer thermal management and lighting control without replacing the main controller.
The board provides four fan headers and two temperature ports, giving enough headroom for hot-end, part-cooling and enclosure fans plus bed and chamber sensors. A single RGB port handles addressable lighting strips. Builders who require more than two temperature channels or additional fan outputs will need a different solution, as this board does not expand beyond the listed ports.
The black ABS board measures approximately 100 by 24 by 17 millimetres (3.93 by 0.94 by 0.67 inches), fitting inside tight printer electronics compartments. Passive cooling is provided by the board material itself; no active fan or heatsink is included. Power draw is limited to the connected fans and RGB devices, so the main power supply must cover those loads.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The board provides four fan ports and two temperature ports that match the 2.4 printer layout, so the original headers plug straight in.
Flash the Klipper firmware, then check the web interface for the new fan and temperature sensors reporting live readings.
Only the expansion board itself is included; mounting hardware and any extra cables must be sourced separately.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?