Zyvpee GA91S2H PFTS 12V .35A 4 Pin VGA Cooling
A 12 V 0.35 A four-pin VGA cooling fan with sleeve bearing and no LED lighting
- Bearing designSleeve bearing
- Power input connector4 Pin
- LED lightingNon-LED
- Product typeCPU Cooler Fan
- Compatible withCPU Cooler
- Product colorBlack
- 12 V power for stable graphics cooling
- 35 A draw keeps energy use low
- four-pin connector enables PWM speed control
- sleeve bearing runs quietly at idle
- frameless design fits tight GPU shrouds
Zyvpee GA91S2H PFTS 12V .35A 4 Pin VGA Cooling
This Zyvpee GA91S2H PFTS is a frameless VGA cooling fan designed for graphics card coolers that use a 4 pin connector. It suits builders replacing a worn fan on an existing heatsink or assembling a custom GPU cooling loop. Buyers needing a PWM-controlled blower or a larger frame for direct die contact should look elsewhere.
Thermals noise and power draw in normal use
The sleeve bearing and 12 V .35 A rating deliver steady airflow for typical GPU thermal loads without high current draw. DC operation means speed scales with voltage rather than a PWM signal, so acoustic output rises linearly with load. Systems requiring silent idle or software fan curves tied to PWM headers will not benefit from this design.
What the bundled accessories
No accessories, mounting hardware or control software are included with the fan. The bare unit assumes the host cooler already provides screw holes, retention clips and power routing. Installers must supply their own fasteners and verify pinout alignment before powering the card.
How it compares
Measured against everything we stock in GPU Fans & Heatsinks, at today’s prices. Recalculated every night.
- Price $18.99
- Cheaper than about 55% of the 143 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product line | GA91S2H PFTS |
| Model name | GA91S2H |
| Product type | CPU Cooler Fan |
| Product color | Black |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Bearing design | Sleeve bearing |
| Compatibility | |
| Compatible with | CPU Cooler |
| More details | |
| LED lighting | Non-LED |
Questions about this item
How is the GA91S2H PFTS fan installed in a graphics-card cooler and what step is often missed?
Remove the original fan, align the four mounting holes, connect the 4-pin header, then verify the PWM signal is active so speed control works.
What maintenance or replacement will the sleeve-bearing GA91S2H PFTS need later?
Sleeve bearings gradually lose lubrication; expect rising noise or reduced speed after extended use, at which point the fan should be swapped.
What limit appears first when the GA91S2H PFTS runs at 12 V and 0.35 A under sustained load?
The frameless DC motor reaches its thermal ceiling, forcing the controller to lower RPM to keep the sleeve bearing within safe temperature.
More in GPU Fans & Heatsinks
Similar items
Thermaltake CL-W183-CU00TR-A Pacific V-GTX 1080Ti Founders Edition Transparent vga cooling
- NIVDIA Geforce GTX…
- Dimension: 22.6 × 1…
SXDOOL PLD09210S12HHVoltage 87mm VGA Cooling Fan 12V .40A 3Pin
- 87 mm
- >80 CFM
Thermaltake CL-W184-CU00TR-A Pacific V-GTX 1080Ti Transparent ASUS ROG vga cooling
- ASUS ROG STRIX GTX1…
- Dimension: 19.4 × 1…





