ADCAUDX DC-0052 SATA cable 12 inch 3 pack blue
Three 12-inch SATA 6Gbps cables with locking latches connect SSDs, HDDs and optical drives in tight spaces
- Rated speed6 Gbit/s
- Connector detailsSata 7 Pin
- Conductor typeTin
- Product typeSATA Cables
- Product colorBlue
- Overall length12
- Three 12-inch SATA III cables at 6 Gbps for multi-drive expansion
- Thin 30 AWG flexible blue cables simplify routing in tight cases
- Locking 7-pin latches keep data links secure under vibration
- Labelled P1–P3 ends speed up RAID or multi-bay setup
- Backwards compatible with SATA I and II drives for legacy support
Three-pack 12-inch SATA III cables
This pack contains three blue SATA III data cables, each 12 inches long. They connect motherboards or host controllers to SATA SSDs, hard drives, or optical drives. The cables carry data only and do not supply power to the attached drive.
Sustained 6 Gbps transfer with locking latch
Each cable supports up to 6 Gbps data rates and is backward compatible with SATA I and II devices. The 30 AWG tin conductors and locking latch on every 7-pin connector maintain a stable signal during continuous read and write workloads. Labels P1 to P3 help identify cables in multi-drive or RAID setups.
SATA interface practical limits
The SATA 6 Gbps ceiling is shared by all drives on the same controller, so aggregate throughput cannot exceed the bus maximum. Cable length is fixed at 12 inches, restricting routing to short internal runs. Drives requiring a separate power connection must be powered independently.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | DC-0052 |
| Product type | SATA Cables |
| Product color | Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sata 7 Pin |
| Size & build | |
| Conductor type | Tin |
Questions about this item
Do these thin 30 AWG SATA cables generate noticeable heat or draw extra power during continuous all-day operation?
The cables are passive 6 Gbps data links with tin conductors; they carry only signalling current and add no measurable heat or power draw to a running system.
What separate component must already be installed so the connected drive receives power?
Each drive needs its own SATA power connector from the PSU because the 7-pin data cable supplies no power at all.
Will the 12-inch blue cables work reliably with an older SATA I hard drive kept in the same build?
Yes, they are backwards compatible with SATA I and SATA II drives, and the 6 Gbps rating simply caps at the drive's own maximum speed.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000219black-3p SATA III cable 3-pack 18 inch black
- Sata III
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA





