Aomoproing SAS 6 SATA 7Pin Male to 6 SATA 7Pin Male Cable 50cm
Connects six SATA drives to a RAID controller with six 7-pin male connectors and 6 Gbps speed
Cable Length 1m
- 0.5m$11.99
- 1m$16.99
- Connect up to six SATA drives to a single controller
- Supports 6 Gb/s SATA specification for reliable data transfer
- 50 cm length suits compact server and RAID builds
- 12 total SATA 7-pin connectors (6 host, 6 device)
- Straight-through SAS-to-SATA wiring for broad compatibility
Six-drive SATA cable for RAID controllers
This internal cable links a six-port SATA RAID controller to up to six SATA hard drives or SSDs using 7-pin male connectors on both ends. It is built to the 6 Gb/s SATA specification and suits server or workstation builders who need a tidy multi-drive connection. The 50 cm length keeps routing neat inside standard chassis.
Suits single-controller arrays, not split backplanes
The cable serves administrators assembling a single-controller RAID set or a direct-attached storage shelf where one host port fans out to six drives. It does not suit installations that require a splitter or expander to divide one controller port across multiple backplanes. Buyers needing longer reach between distant drive cages should look for a different cable length.
Six SATA 7-pin male connectors per end
Each end carries six standard SATA 7-pin male plugs, giving a one-to-one mapping between controller ports and drive ports. The design follows the 6 Gb/s SATA specification while the connectors are rated for 12 Gb/s SAS signalling. Verify that your RAID controller and drive backplane both present six SATA 7-pin headers before ordering.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing SFF-8087 to 4x SATA 90° Breakout Cable 1.64ft Blue/Black
Aomoproing Mini SAS SFF-8087 36-pin male to 4 SATA 7-pin female cable 0.5 m
Questions about this item
What does the 6 Gb/s SATA spec actually deliver once the cable is installed in a server?
The cable meets the 6 Gb/s SATA specification, so each of the six attached drives can transfer data at up to 6 Gb/s when connected to a compatible controller.
Which interface standard does the cable use and what speed does it cap at in practice?
It uses the SATA 7-pin interface and is rated for 6 Gb/s per drive; the connectors are designed for the next generation of SAS at 12 Gb/s but SATA operation remains at 6 Gb/s.
What physical space and connectors are needed to fit this 50 cm cable inside a chassis?
The cable requires a host with six SATA 7-pin ports and provides six SATA 7-pin device connectors spaced along a 50 cm length for internal drive mounting.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA










