Aomoproing SATA Cable III 3-pack 6 Gbps 15.75 inch Blue
Three SATA III cables with locking latches connect drives at up to 6 Gbps over 15.75 inch lengths
- Product colorBlue
- Fast 6 Gbps transfers with SATA 3.0 support
- Three cables included for RAID or spare drives
- Locking latches keep connections secure during use
- 75 inch length fits standard drive bays
- Blue colour helps identify cables inside the case
Three-pack SATA III data cables
This three-pack supplies three SATA III cables for connecting internal hard drives, SSDs or optical drives to a motherboard or host controller. Each cable carries data only and does not deliver power, so the drive must receive power from a separate source. The blue colour helps identify the cables inside a busy chassis. They suit anyone adding or replacing storage in a desktop system.
Locking latches and 15.75 inch length
A locking latch on both ends of every cable secures the connection against accidental disconnection during moves or vibration. The 15.75 inch length reaches most drive bays without excess slack, keeping airflow tidy. Backwards compatibility with SATA I and SATA II ports means the cables work with older controllers while still supporting the 6 Gbps ceiling of revision 3.0 when the attached equipment allows it.
Replaces worn or missing SATA leads
These cables replace damaged, lost or too-short original leads and provide spares for multi-drive or RAID setups. The jump is worth it when an existing cable lacks a locking latch or limits the link to an older revision. They do not suit builds that need powered eSATA ports or external drive enclosures.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Blue |
Questions about this item
What practical speed limit does the SATA 3.0 interface on these cables impose?
The cables support up to 6 Gbps, but actual throughput is capped by the slowest connected device such as the drive or controller.
What physical clearance is required for the straight connectors with locking latches on each end?
Each connector needs enough room for the straight body plus the latch release tab, so allow a few millimetres beyond the port for finger access.
How do you correctly seat the locking latch during installation?
Push the connector straight in until the latch clicks; the common mistake is stopping at first contact without hearing the click.
More in SATA & eSATA Drive Cables
Similar items
BENFEI SATA III 6Gbps Cable 3-Pack 18 Inch Blue Locking Latch
- Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Coolgear SS-AZX12MPSS SATA 12" Male-Female Extension Cable (7 Pin) Red
- Sata 7-pin
- SATA





