Benfei 000221black USB 3.0 to SATA adapter .5 m with 12 V 2 A power supply
Connects 2.5 or 3.5 inch SATA drives to USB 3.0 at up to 5 Gbps with UASP and includes a 12 V 2 A power supply
- Rated speed5 Gbit/s
- Connector genderMale
- Conductor typeCopper
- Product typeUSB
- Product colorUSB to 2.5 3.5 SSD HDD
- Overall length0.5
- Connect 2.5" or 3.5" SATA drives instantly without an enclosure
- USB 3.0 interface delivers up to 5 Gbps data transfer speed
- UASP support accelerates read and write performance over standard USB 3.0
- Included 12 V 2 A power adapter ensures stable operation for 3.5" drives
- Plug-and-play design requires no drivers for quick drive swaps
Quick SATA drive access
The Benfei 000221black adapter connects a 2.5 or 3.5 inch SATA SSD or HDD to a USB 3.0 port. It suits technicians who need to recover data, clone disks or add temporary storage without opening a computer case. The short .5 m cable keeps the setup tidy on a desk or bench.
Plug-and-play with dedicated power
Copper conductors carry up to 5 Gbps and the link is backward compatible with USB 2.0 and 1.1. A 12 V 2 A power supply is included so 3.5 inch drives spin up reliably; 2.5 inch units draw power from the USB port alone. UASP support reduces protocol overhead for faster real-world transfers.
Ready for immediate use
The package supplies the adapter and the 12 V 2 A power brick. No driver installation is required on modern operating systems. The 18 month warranty covers defects, while the plug-and-play design lets you swap drives in seconds rather than mounting them in an enclosure.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | BENFEI |
| Model name | 000221black |
| Product type | USB |
| Product color | USB to 2.5 3.5 SSD HDD |
| Performance | |
| Rated speed | 5 Gbit/s |
| Ports & slots | |
| Connector gender | Male |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What USB standard does the adapter use and what real-world speed does it cap at?
The adapter uses USB 3.0 and caps at 5 Gbps, with UASP support that can raise read speeds by 70% and write speeds by 40% over standard USB 3.0.
Which drive sizes fit and what extra power is needed?
It accepts 2.5-inch and 3.5-inch SATA drives; 2.5-inch units run from the USB port, while 3.5-inch drives require the included 12 V 2 A power adapter.
How do I install it and what step do people skip?
Connect the SATA plug to the drive, attach the USB cable to the computer, add the 12 V adapter for 3.5-inch drives, then partition a new drive in Disk Management before use.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





