BUCIER 3-pack SATA cable III 90° straight to right angle 6Gbps locking latch 50cm 18in red
Three SATA 3.0 cables with 90° right-angle locking connectors transfer data up to 6 Gbps over 50 cm lengths
- Product colorRed
- 6 Gbps top speed backed by SATA 3.0 spec
- 90° right-angle ends fit tight drive bays
- Locking latches on both connectors resist vibration
- Three cables in one pack cover RAID or spares
- 50 cm / 18 in length suits most internal layouts
Three-pack SATA III cables
This three-pack supplies three red SATA III cables, each 50 cm or 18 inches long, with a straight connector on one end and a 90-degree right-angle connector on the other. Both ends include a locking latch for a secure fit. They are intended for connecting internal hard drives, SSDs or optical drives to a motherboard or host controller.
Builders adding several drives
The pack suits anyone installing multiple SATA devices or building a RAID array where matching cables keep routing tidy. The right-angle ends help in tight drive bays or behind large graphics cards. Users who need only a single cable, prefer straight-to-straight connectors, or require longer lengths for full-tower cases should look elsewhere.
Sustained 6 Gbps transfers
Each cable meets the SATA Revision 3.0 specification for up to 6 Gbps throughput and is backwards compatible with earlier SATA versions. The tinned copper core and aluminium foil shielding maintain signal integrity during extended file moves or backups, while the locking latches prevent accidental disconnection under vibration. Actual transfer rates remain limited by the connected drive and controller.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Red |
Questions about this item
What type of drive connectors does the 90° SATA cable need on the motherboard and the drive?
It connects a straight SATA port on the motherboard or host controller to a right-angle SATA port on an internal hard drive, SSD or optical drive.
Will the 6 Gbps cable work with my older SATA I or SATA II ports?
Yes, the SATA Revision 3.0 cable is backwards compatible with SATA I and SATA II ports, running at the speed of the slower port.
How can I confirm the locking latches are engaged after I plug the cable in?
Each end has a latch that clicks into the SATA port; a firm tug should not pull the connector free when the latch is seated.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
DIXSG 3-pack SATA cable 90° straight to right angle 6Gbps 50cm 18 inch
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





