BUCIER Mini-SAS SFF-8087 to 4 SATA 90° 3.3FT 2Pack
Two Mini-SAS SFF-8087 cables break out to four 90-degree SATA connectors each for internal drive arrays
- Rated speed6 GB/s
- Connector detailsMini Sas Sff-8087 to Sata
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack/Blue
- Overall length3.3
- 2-pack gives spare cable for second array
- 6 Gbps per drive keeps SSD/HDD at full speed
- 90° SATA plugs fit tight backplane bays
- Locking latches on both ends prevent accidental disconnects
- 30 AWG conductors stay flexible for clean routing
2-pack Mini-SAS SFF-8087 breakout cables
This 2-pack provides two Mini-SAS SFF-8087 to 4 SATA forward breakout cables. Each 3.3FT cable connects a SAS HBA or RAID controller to four SATA hard drives or SSDs. The 36-pin male SFF-8087 host connector features a locking latch for a secure link to the controller. Builders expanding internal storage with a SAS controller use these cables to reach drive bays or backplanes.
90-degree right-angle SATA connectors aid routing
The four SATA 7-pin female target connectors are angled at 90 degrees to reduce strain in tight chassis. Thin 30 AWG copper conductors keep the assembly flexible for clean cable management. Both the Mini-SAS and SATA ends include locking latches to prevent accidental disconnection during operation. Data transfer runs at up to 6Gbps per drive across the SAS-to-SATA link.
Replaces loose straight cables in dense servers
The right-angle design solves clearance issues where straight SATA plugs block adjacent slots or side panels. It upgrades installations that previously used stiff cables without locking latches. The jump is worth it when four drives share a single SFF-8087 port and physical space behind the backplane is limited. Do not connect the SFF-8087 end directly to a backplane; the cable is wired for controller-to-drive topology only.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | Mini SAS-020 |
| Product type | Mini-SAS Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Ports & slots | |
| Connector details | Mini Sas Sff-8087 to Sata |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How do I connect the SFF-8087 end to my RAID controller without bending the cable?
Insert the 36-pin male connector straight into the controller's SFF-8087 port until the locking latch clicks; the 90-degree SATA ends then route flat along the drive bays.
When should I replace the cables if I run four drives continuously?
Inspect the 30 AWG conductors and locking latches annually; swap any cable showing cracked insulation, loose latches or intermittent drive drops.
What throughput ceiling will I hit first with four SATA drives on this breakout?
Each drive is limited to 6 Gbps by the SATA interface, so the aggregate ceiling appears at the SATA target side before the 12 Gbps host link saturates.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Benfei 000221black USB 3.0 to SATA adapter .5 m with 12 V 2 A power supply
- Male
- USB
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





