BUCIER Mini-SAS SFF-8087 to 4× SFF-8482 cable 0.5 m with SATA power adapter
Connects a Mini-SAS SFF-8087 host port to four SFF-8482 drives with integrated SATA power adapters for direct backplane attachment
- Rated speed6 Gbit/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack/Blue
- Overall length1.6
- Connects one 36-pin SFF-8087 host to four SFF-8482 targets
- 6 Gb/s per drive with 30 AWG copper conductors
- Each target includes SATA 15-pin power adapter
- 5 m length fits tight chassis routing
- Forward breakout design for SAS RAID controllers and backplanes
Mini-SAS breakout cable for SAS controllers
This cable splits a single SFF-8087 36-pin host port into four SFF-8482 target connectors, each with an integrated SATA 15-pin power adapter. It connects a SAS RAID controller or HBA directly to up to four SAS or SATA hard drives or SSDs. The assembly uses 30 AWG conductors and measures 0.5 m in length.
Practical limits of the 6 Gb/s SAS interface
Each target connector supports a data transfer rate up to 6 Gb/s per drive. The SFF-8087 host end must plug into a controller or motherboard port; connecting it to a backplane will prevent operation. A separate SATA power cable from the power supply is required for every drive attached to the breakout.
Upgrades from single-drive SAS or SATA cables
Replacing individual drive cables with this breakout reduces cable count and simplifies routing inside the chassis. The jump is worthwhile when a controller has free SFF-8087 ports and you need to attach multiple drives without adding extra HBAs. It does not work with SAS drivers or backplane-host configurations.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | Mini SAS-009 |
| Product type | Mini-SAS Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Should I pick the 0.5 m or 1.6 m length for my chassis?
The cable is 0.5 m long; the 1.6 m figure in the supplier title is the same length expressed in feet.
What does the 6 Gb/s per drive rating mean when the cable is installed?
Each of the four SFF-8482 connectors can deliver up to 6 Gb/s to its attached drive, so the aggregate bandwidth depends on how many drives are active.
Does the SFF-8087 host connector limit the link to 6 Gb/s or 12 Gb/s?
The SFF-8087 36-pin host side is a 12 Gb/s SAS-3 interface, but each SFF-8482 target connector operates at 6 Gb/s per drive.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Benfei 000221black USB 3.0 to SATA adapter .5 m with 12 V 2 A power supply
- Male
- USB
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





