BUCIER SATA Cable III 3-Pack 6Gbps Straight Locking Latch 18 Inch Red
Three-pack of 18-inch red SATA 3.0 cables with straight locking connectors for drives and optical devices
- Product colorRed
- 6 Gbps SATA III speed moves a 1 GB file in about 5 seconds
- Locking latches on both straight connectors keep the link secure under vibration
- Three red cables in one pack give spares for RAID or multiple drives
- 18 inch length fits tidy internal routing between motherboard and drive
- Backwards compatible with SATA I and II for wide device support
Three-Cable Pack for Internal Drives
This pack supplies three red SATA 3 cables for connecting motherboards or host controllers to internal hard drives, SSDs and optical drives. The 18 inch length suits typical chassis layouts. Buyers who need right-angle plugs or longer runs for full-tower builds should look elsewhere.
SATA Revision 3.0 Speed Limit
The cables conform to SATA Revision 3.0 and support signalling up to 6 Gbps. Actual throughput is capped by the slowest device on the link, so a SATA II drive will still run at SATA II rates. The 180 degree straight connectors with locking latches resist vibration but add no protocol overhead.
Port Clearance and Device Check
Verify that each target drive and motherboard port accepts a straight 180 degree connector with a latch; some tight headers or low-profile cards block the clip. Confirm the host controller and storage device both operate at the desired SATA generation to avoid unexpected bottlenecks.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Red |
Questions about this item
How many cables come in this pack?
This pack contains three SATA cables, each with straight connectors and a locking latch on both ends.
What transfer speed can I expect with these cables?
The cables support the SATA Revision 3.0 standard for up to 6 Gbps throughput, though real-world speed depends on the drive and controller you connect.
Which SATA version do these cables use and what does it limit?
They use the SATA 3.0 interface, which caps the link at 6 Gbps and remains backward compatible with earlier SATA revisions.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
DIXSG 3-pack SATA cable 90° straight to right angle 6Gbps 50cm 18 inch
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





