BUCIER SATA Cable III 3 Pack 90 Degree 6Gbps 50cm Blue
Three SATA 3.0 cables with 90-degree locking connectors transfer data at up to 6 Gbps over 50 cm lengths
- Product colorBlue
- Up to 6 Gbps transfer speed with SATA 3.0 support
- Three cables included for multiple drives or RAID setups
- 90-degree right-angle connectors fit tight spaces
- Locking latch on each end secures the connection
- 50 cm length suits standard case layouts
Three-Cable SATA 6 Gbps Kit
This pack contains three SATA III cables that link motherboards or host controllers to internal hard drives, SSDs and optical drives. Each cable supports the 6 Gbps SATA Revision 3.0 standard and remains compatible with earlier SATA revisions. The 50 cm length suits typical chassis routing and the blue colour helps identify connections quickly.
Builders Adding Multiple Drives
The three-cable bundle suits RAID arrays, multi-drive storage upgrades or spare cables for future expansion. Locking latches on both ends keep connections secure under vibration. Buyers needing only a single cable or a different connector angle should consider individual alternatives.
Check Port Orientation And Clearance
Verify that your motherboard and drive ports accept the 90-degree right-angle connectors before ordering. Ensure the 50 cm reach fits your drive-bay layout without tension. Confirm your storage devices and controller support SATA 6 Gbps to obtain the rated transfer speed.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Blue |
Questions about this item
Does my motherboard need a free SATA port to use these cables?
Yes, each cable plugs into a standard SATA port on the motherboard or host controller to connect a drive.
Will the 6 Gbps rating work with my older SATA II hard drive?
The cables are backwards compatible with SATA I and SATA II, so the older drive will operate at its own rated speed.
How can I confirm the cable is running at full 6 Gbps after installation?
Check the negotiated link speed in your BIOS or operating system storage information; it should show 6 Gbps if the drive and controller both support SATA Revision 3.0.
More in SATA & eSATA Drive Cables
Similar items
DIXSG 3-pack SATA cable 90° straight to right angle 6Gbps 50cm 18 inch
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III





