CableCreation Internal Mini SAS SFF-8643 to 4x SFF-8482 SATA cable 3.3FT
Connects a Mini SAS SFF-8643 controller to four SFF-8482 drives with included IDE power over 3.3FT
- Connects SAS controller to four SATA/SAS drives
- 3 ft length suits internal chassis routing
- SFF-8643 host to four SFF-8482 targets
- Includes IDE power connectors for drive power
- Controller-based fan-out design for direct attachment
Cable purpose and fit
This internal cable links a Mini SAS SFF-8643 host port to four 29-pin SFF-8482 drive connectors with integrated IDE power. It is built for servers or workstations that use a SAS controller or RAID card to attach SATA or SAS hard disks. The 3.3FT length suits standard chassis routing. Buyers who need to connect drives to a backplane SFF-8643 port cannot use this cable.
Install notes and common issues
The SFF-8643 end plugs into the controller while each SFF-8482 leg attaches to a drive; the IDE power leads draw supply from the same cable assembly. Installers must verify the controller side is SFF-8643 and not a backplane variant, otherwise the pin-out will not match. Incorrect orientation or forcing the latch can bend the 29-pin connectors. No driver is required, but the controller BIOS must recognise the attached disks.
Pre-order checklist
Confirm the host device presents a Mini SAS SFF-8643 controller port rather than a backplane port. Ensure the power supply has enough free IDE power headers for the cable’s power leads. Check that each target drive uses a SFF-8482 interface compatible with SATA or SAS signalling. Measure the internal routing path to confirm the 3.3FT reach is adequate.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the SFF-8643 to 4x SFF-8482 cable is working after connecting it to my RAID controller?
The RAID controller BIOS or operating system should detect each attached SATA or SAS drive on all four SFF-8482 connectors, confirming the x4 link is active.
What comes with the cable and what must I source separately?
The package includes the 3.3FT fan-out cable with one SFF-8643 host end and four 29pin SFF-8482 target ends plus IDE power leads; drives and a compatible controller are not included.
Which version of this fan-out cable should I choose for a controller with an SFF-8643 port?
Select this SFF-8643 to 4x SFF-8482 model when your RAID card or motherboard provides an internal Mini SAS SFF-8643 host connector for up to four SATA or SAS disks.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
DIXSG 3-pack SATA cable 90° straight to right angle 6Gbps 50cm 18 inch
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





