EN-Labs SATA3-RIGHT-50CM SATA cable 0.5 m right 90° to 180° red
A 0.5 m SATA III data cable with a right-angled 90° connector to a straight 180° latched connector, supporting 6 Gbps speeds
- Cable length1.64 ft (0.5m)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Right-angled connector eases routing in cramped cases
- Latching straight end secures the link against vibration
- 6 Gbps SATA III bandwidth handles modern SSD speeds
- 26 AWG tinned copper conductors reduce signal loss
- Half-metre length keeps cable clutter to a minimum
Right-angled SATA cable for tight builds
This 0.5 m SATA III cable has one right-angled 90° connector and one straight 180° connector with a latch. The 26 AWG tinned copper conductors are shielded and support up to 6.0 Gbps transfer rates. The red jacket makes it easy to trace inside a crowded chassis.
Installers needing a single short run.
Builders routing a single drive behind a motherboard tray or into a cramped drive cage will appreciate the low-profile right angle. Anyone daisy-chaining several devices or running cables longer than .5 m should look at something else.
90° right-angled connector orientation
The defining spec is the right-side 90° to 180° connector pairing, which determines whether the cable clears adjacent headers or drive bays. Match this orientation to your board layout before ordering.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 92% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA3-RIGHT-50CM |
| Product type | SATA III |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 16 in - 20 in |
| Cable length | 1.64 ft (0.5m) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
Does the 0.5 m length reach my drive?
The cable is 0.5 m (19.7 in) long; measure from your motherboard port to the drive bay to confirm it fits.
Will 6 Gb/s actually move data at that rate?
The link supports up to 6.0 Gb/s, but real throughput is limited by the slowest connected device — drive, controller or port.
What does the right-side 90° to 180° angle mean for my build?
One plug bends 90° to the right and the other runs straight (180°), letting you route the cable tight against a drive or motherboard edge.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3L-2FT-RD 2 ft SATA cable UV Red
- 2 ft (0.61 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





