Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
A 12-inch cable splits one LP4 connector into two right-angle SATA power ports for drives
- Powers two SATA drives from one LP4 connector
- Right-angle latching SATA plugs fit tight spaces
- 12-inch cable length aids routing in compact cases
- 4-pin LP4 male to dual SATA female power
- Compatible with SATA hard drives and optical drives
LP4 to Dual SATA Power Cable
This 12 inch adapter converts a single 4 pin LP4 power connector into two right-angle latching SATA power outputs. It lets you power two SATA hard drives, optical drives or other compatible devices from one power supply lead. The right-angle plugs help routing in tight drive bays. Builders adding SATA storage to a supply with only LP4 sockets will use this cable.
Limited to Two Drives and LP4 Supply
The cable provides exactly two SATA power connections and no more. It requires an available LP4 connector on the power supply, so systems without that legacy output cannot use it. Total current draw of both attached drives must stay within what the single LP4 rail can deliver. The 12 inch length restricts placement to drives near the power supply or the LP4 lead.
Replaces Molex to SATA Adapters or Y-Splitters
This cable replaces separate LP4 to SATA adapters or a Molex Y-splitter plus individual converters. The integrated dual right-angle design reduces connector bulk and improves airflow compared with stacked straight plugs. The jump is worth it when you need two SATA power ports from one LP4 source and want a single tidy cable. It does not add extra power phases or increase the supply's total wattage.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 93% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How many drives can I power from one LP4 connector with this cable?
The cable splits a single 4-pin LP4 plug into two right-angle latching SATA power connectors, so you can run two SATA hard drives or optical drives from one power supply lead.
What does the 12-inch length mean for routing inside a case?
At 12 inches the cable reaches from a typical PSU LP4 port to two drives mounted in adjacent 3.5-inch or 5.25-inch bays without excess slack.
Does the SATA power end use the standard latching connector?
Yes, each branch ends in a right-angle latching SATA power plug that clicks onto Serial ATA hard drives, CD-RW or DVD-ROM drives.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
CoolGear SS-22MPS SATA power splitter 1 to 3 15-pin
- 1 SATA to 3X SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Darkside 45 cm SATA 2.0/3.0 7P 180° to 180° latch cable gun metal DS-0912
- 1.48 ft (0.45 m)
- 1.5 ft (0.46 m)





