Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A PCIe x8 Gen4 ReDriver gender changer with EDSFF connector, built-in clock buffer and SMBus I/O expander for BMC management
The Innocard DP8507 is a PCIe x8 Gen4 gender changer with an integrated ReDriver that extends 8-lane data signals across longer traces and cables. It targets server and industrial builders who need reliable PCIe 4.0 connectivity between a host board and an EDSFF 2C device.
A built-in 100 MHz clock buffer and bidirectional voltage-level translators for WAKE# and CLKREQ# maintain signal integrity over extended distances during continuous operation. The 12 V hot-plug power path includes an eFuse for protection, while PERST0# and PERST1# support out-of-band remote reset of the attached Gen-Z 2C module.
The card provides a latched EDSFF 2C connector and exposes SMBus addresses 0x6C for clock-buffer control and 0x21 for Gen-Z 2C power-disable via an I/O expander, enabling full Baseboard Management Controller oversight. It is not suited for installations that require a different form factor or lack BMC infrastructure.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | EDSFF |
The card includes a PCIe ReDriver and 100 MHz clock buffer to extend the 8-lane Gen 4 signal over longer traces and cables, plus a 12 V hot-plug eFuse for power protection; no active cooling is fitted, so dissipation stays within the slot and cable budget.
A PCIe x8 Gen 4 CEM slot on the motherboard or riser is required, and the board provides a built-in EDSFF 2C latch connector for the mating cable or device.
The on-board I/O expander uses address 0x21 and the clock buffer uses 0x6C for BMC management, while PERST0#, PERST1#, WAKE# and CLKREQ# translators provide open-drain level shifting compatible with Gen-Z 2C out-of-band control.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?