Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a PCIe x8 Gen 4 link to dual SFF-8673 Mini SAS HD ports with an integrated ReDriver, clock buffer and ESD protection for 16 GT/s operation
This Innocard adapter converts a PCIe x8 Gen4 slot into two SFF-8673 Mini SAS HD connectors. It includes a built-in ReDriver controller that extends 16 GT/s differential signals across eight lanes. The card draws 3.3 V input power with TVS and load-switch protection for the controller. A clock buffer and SMBus circuitry support longer cable runs and out-of-band management.
The card suits builders adding internal SAS or U.2 storage through a standard PCIe slot. It supports bifurcation into two x4 links for flexible topologies. It is not for users who require an external cable interface or a different connector type. It is also not for systems lacking a free x8 electrical slot or 3.3 V auxiliary power.
The deciding specification is the dual SFF-8673 4X interface driven by the PCIe 4.0 x8 ReDriver. Verify that your target drives and cables use the SFF-8673 Mini SAS HD pinout before purchasing.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
Yes, it plugs into a PCIe x8 Gen4 slot and draws 3.3 V through the connector with built-in TVS and load-switch protection.
The board bifurcates the 8 lanes into two x4 links, so each SFF-8673 port must connect to a separate x4 endpoint; plugging both cables into the same controller port breaks the link.
The ReDriver, 100 MHz clock buffer, SMBus switch at address 70, I/O expander at address 20 and PERST# buffer gate are the active silicon that could require replacement if they degrade.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?