JacobsParts EXT-STADRV-50CM SATA 15+7 Pin Male-Female Combo Extension Cable 19 in
Combines SATA data and power into a single 15+7 pin male-to-female extension cable measuring 19 inches
- Cable length19 in (48.3 cm)
- Product typeSATA
- Overall length19 in (48.3 cm)
- Combines data and power in one cable for simpler drive installs
- 19 in length adds reach between drive and motherboard
- Male-to-female 15+7 pin connectors fit standard SATA ports directly
- Round cable shape eases routing inside tight chassis
- New condition ensures reliable signal and power delivery
Product purpose
This SATA combo extension cable adds 19 inches of reach between a drive and the motherboard. It merges the 7-pin data and 15-pin power connections into a single male-to-female link. The design suits builders who swap drives frequently or need extra routing length inside a laptop or compact chassis.
Thermals noise power
The cable carries only low-voltage signalling and supply current, so it generates no measurable heat and runs silently. No active components or external power are required, keeping the power draw identical to a standard SATA link. The round profile helps airflow by reducing clutter around the drive bay.
Bundled value
The single integrated connector replaces two separate cables, cutting installation time and eliminating mismatched lengths. Its male-to-female orientation lets you plug directly into the drive on one side and existing SATA data and power cables on the other. No software or drivers are involved.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 92% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | JacobsParts |
| Model name | EXT-STADRV-50CM |
| Product type | SATA |
| Size & build | |
| Overall length | 19 in (48.3 cm) |
| Cable length | 19 in (48.3 cm) |
Questions about this item
How do I connect the 15+7 pin male end to my drive and the female end to the motherboard cables?
Plug the combined 15+7 pin male connector directly into the hard drive or SSD. Then attach a standard 7-pin SATA data cable and a 15-pin SATA power cable to the female side of the extension.
Will the SATA connectors wear out if I swap drives frequently?
The male-to-female SATA connectors are rated for repeated mating cycles typical of drive swaps. No specific maintenance is required beyond keeping the pins clean and free of dust.
Does the 19 inch length cause signal degradation at high speeds?
At 19 inches the cable stays well within the SATA specification maximum length, so sustained data transfers will not hit a signal-integrity limit.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3L-2FT-RD 2 ft SATA cable UV Red
- 2 ft (0.61 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





