Jansicotek SATA III cable 3-pack 18 inch straight latch
Three 18-inch SATA cables with straight locking connectors support 6 Gbps data transfer for drives and optical devices
- Product colorBlack
- 6 Gbps data transfer via SATA 3.0 specification
- Locking latch on each straight connector secures the link
- 18-inch length fits typical internal drive bays
- Three cables in one pack cover spare or RAID needs
- Backwards compatible with SATA I and SATA II drives
Three-pack SATA III cables for storage upgrades
This set of three Jansicotek SATA III cables connects internal hard drives, SSDs and optical drives to a motherboard or host controller. Each cable measures 18 inches and features straight 180-degree connectors with locking latches. The pack suits builders adding multiple drives or keeping spares for quick replacements.
Sustained 6 Gbps data transfer
The cables operate to the SATA revision 3.0 specification, supporting transfer rates up to 6 Gbps. Actual throughput depends on the connected drive and controller. Locking latches maintain a firm connection during vibration or case movement, preventing dropouts during long copy jobs or RAID rebuilds.
Simple push-fit install with latch release
Straight connectors plug directly into drive and motherboard ports; the latch clicks home and releases with a finger press. No tools or adapters are required. The cables carry data only, so a separate SATA power lead from the PSU is still needed for each drive. Builders needing angled connectors for tight clearances should look elsewhere.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
Does the 18 inch cable generate heat or noise during all-day use?
No, the passive SATA cable carries only data signals and produces no heat or audible noise regardless of how long it runs.
What must my system already have for these cables to work?
A motherboard or host controller with a SATA port and a separate power connection for each drive, because the cable supplies data only.
Will the straight 180 degree locking connectors fit older SATA I and II drives I want to keep?
Yes, the SATA 3.0 interface is backwards compatible with SATA I and II devices, and the latch secures the connection on any revision.
More in SATA & eSATA Drive Cables
Similar items
BENFEI SATA III 6Gbps Cable 3-Pack 18 Inch Blue Locking Latch
- Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Coolgear SS-AZX12MPSS SATA 12" Male-Female Extension Cable (7 Pin) Red
- Sata 7-pin
- SATA





