Manw IDE 4Pin to Dual SATA Power Y Splitter Cable 15cm
Converts one IDE 4Pin power connector into two SATA 15Pin ports for dual drives with a compact 15cm length
- Splits one IDE 4Pin into two SATA power ports for dual drives
- 15cm short length keeps cabling tidy and improves case airflow
- Delivers stable 5V and 12V power to 2.5 SSD and 3.5 HDD
- Thick wire core reduces voltage drop to prevent drive freezes
- Snap-lock SATA connectors resist vibration for reliable long-term connection
Compact IDE-to-SATA Power Splitter
This 15 cm Y-splitter converts a single IDE 4Pin Molex connector into two SATA 15Pin power ports. It is designed for builders who need to power additional 2.5" SSDs or 3.5" HDDs inside tight mini-ITX cases or compact NAS enclosures. The short length keeps internal cable routing clean and supports better chassis airflow.
Short Length and Locking Connectors
The 15 cm cable eliminates excess slack that can obstruct airflow in small builds. Snap-lock SATA terminals secure each drive connection against vibration-induced disconnection. Thick conductive wire cores maintain stable 5 V and 12 V delivery to both devices simultaneously, preventing drive drop-outs during heavy read-write workloads.
Ideal for Legacy PSU Upgrades
Suits users adding SATA storage to power supplies that only offer Molex outputs, avoiding a full PSU replacement. Not suited for builders who require longer cable runs for full-tower routing or need to power more than two drives from a single Molex source.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Manw |
Questions about this item
Will the IDE 4Pin connector on this splitter wear out and need replacing?
The IDE 4Pin male input plugs directly into the power supply Molex connector and has no moving parts; it is designed for long-term continuous operation without scheduled replacement.
What stops me from adding more drives to the two SATA power ports?
Each SATA 15Pin female port supplies stable 5V and 12V power; the total available current is limited by the single IDE 4Pin source from the power supply.
Does the 15cm cable run hot or draw extra power when both drives run all day?
Thick conductive wire cores reduce voltage drop, so the cable itself does not generate significant heat and adds no measurable power draw beyond the connected drives.
More in SATA & eSATA Drive Cables
Similar items
BENFEI SATA III 6Gbps Cable 3-Pack 18 Inch Blue Locking Latch
- Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Coolgear SS-AZX12MPSS SATA 12" Male-Female Extension Cable (7 Pin) Red
- Sata 7-pin
- SATA





