Micro Connectors 20 Inch SATA III Straight Right Angle Sleeved Locking 3-Pack
Three 20-inch SATA cables with straight and right-angle locking connectors, sleeved for a clean build
- Product colorBlack
- SATA III speeds up to 6 Gbp/s for fast data transfer
- Straight and right-angle connectors with locking latches ensure secure connections
- Premium weave sleeving without heatshrink provides a clean, flexible appearance
- Three cables in one pack deliver value for multiple drive installations
- 20-inch length suits typical internal routing needs
Straight Right-Angle SATA III Cables
This three-pack supplies 20-inch SATA III cables with a straight connector on one end and a right-angle connector on the other, each fitted with a locking latch. The premium weave sleeving is heatshrink-free for a clean internal appearance. They connect SATA or eSATA storage devices to a motherboard or controller at up to 6 Gbp/s.
Replaces Standard Flat SATA Leads
The right-angle plug eases routing in tight drive bays or behind graphics cards where a straight head would press against neighbouring components. Locking latches prevent accidental disconnection during transport or vibration. The upgrade is worth it when cable management space is limited or when a tidy, sleeved look is preferred over bare ribbon cables.
Suits Builders Needing Angled Locking Connections
Ideal for enthusiasts assembling compact or showcase systems who value secure, routed data paths and a uniform black aesthetic. Less suitable for buyers who want more storage connectors than the pack provides, or for installations requiring exclusively straight-to-straight or right-angle-to-right-angle orientations.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
What clearance does the right-angle connector need behind a SATA port?
The right-angle plug bends the cable at the drive end, so allow enough space behind the SATA port for the bend and the locking latch to sit without strain.
How do I secure the locking latch on each connector?
Push the connector straight into the SATA port until the metal latch clicks into the port's notch; pulling the cable body instead of the latch releases it cleanly.
When should I replace a cable from the three-pack?
Replace a cable if the sleeving frays, the latch no longer clicks, or you get intermittent drive detection after ruling out the drive and port.
More in SATA & eSATA Drive Cables
Similar items
BENFEI SATA III 6Gbps Cable 3-Pack 18 Inch Blue Locking Latch
- Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Coolgear SS-AZX12MPSS SATA 12" Male-Female Extension Cable (7 Pin) Red
- Sata 7-pin
- SATA





