Monoprice 107642 SATA 15-pin Male to 4-pin Molex and 4-pin Power Cable 12 inch
Converts a 15-pin SATA power connection into 4-pin Molex and 4-pin Mini connectors for legacy devices
- Cable length1 ft (0.3 m)
- Connector count2
- Product typeOthers
- Product colorBlack
- Overall length1 ft (0.3 m)
- Converts SATA power to Molex and floppy connectors
- 12 inch length fits tight chassis builds
- 15-pin male plug mates with modern PSU cables
- Two output connectors power legacy drives simultaneously
- Black jacket blends cleanly inside dark cases
SATA 15-pin to dual legacy power
This adapter cable converts a single SATA 15-pin power connector into a 4-pin Molex and a 4-pin Mini (Floppy) power connector. It is intended for builders who need to run older drives or accessories from a modern power supply. The 12 inch length keeps routing tidy inside standard desktop cases.
Capacity and headroom
The cable provides two legacy outputs from one SATA source, letting you power a pair of devices such as optical drives or fan controllers. It draws its current from the SATA rail, so total load must stay within that connector’s rating. It does not supply a SATA power plug for newer SSDs or hard drives.
Build fit and clearance
A 1.00 ft black cable reaches nearby drive bays without excess slack. The straight connectors require no special orientation, and the assembly needs no additional adapters or software. It frees up Molex leads on the power supply for other components while adding legacy support.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 92% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 107642 |
| Product type | Others |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 1 ft (0.3 m) |
| Cable length | 1 ft (0.3 m) |
Questions about this item
Can the 15-pin SATA plug on this cable power a legacy 4-pin Molex drive and a 4-pin floppy device at the same time?
Yes, the 15-pin SATA male connector splits into one 4-pin Molex and one 4-pin Mini (Floppy) power connector so both legacy devices can draw power from a single SATA header.
How can I verify the cable is delivering power correctly after I connect it inside the case?
Power on the system and confirm that each attached legacy device spins up or lights up; the cable has no status LEDs so device activity is the only direct indication.
What connectors are included on the 12-inch cable and is any additional adapter required?
The cable provides a 15-pin SATA male plug, a 4-pin Molex female connector and a 4-pin Mini (Floppy) female connector; no extra adapters are needed for those interfaces.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3L-2FT-RD 2 ft SATA cable UV Red
- 2 ft (0.61 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





