Monoprice Inc. 108779 SATA 6Gbps 24-Inch Cable with Locking Latch Black
A 24-inch SATA 6 Gbps cable with locking latches on both connectors for secure internal connections
- Cable length2 ft (0.61 m)
- Connector count2
- Product typeOthers
- Product colorBlack
- Overall length2 ft (0.61 m)
- Certified 6 Gbps throughput with SATA 3.0 devices
- Locking latch on each connector prevents accidental disconnects
- 24-inch length suits compact or full-size builds
- Backwards compatible with 3.0 and 1.5 Gbps hardware
- Black straight connectors for clean internal routing
24-Inch SATA 6 Gbps Cable
This 24-inch internal cable connects SATA drives to motherboards or controllers at up to 6 Gbps. It suits builders assembling or upgrading desktops and servers that use the SATA Revision 3.0 interface. The black jacket and straight connectors fit standard drive bays and board headers without obstruction.
Straight Locking Latch Installation
Each end has a straight connector with an integrated locking latch that clicks into the port to resist vibration and accidental disconnection. Route the cable gently to avoid sharp bends near the latch; forcing the connector sideways can damage the plastic catch. The latch releases with a light squeeze, so removal does not require tools.
6 Gbps Certified Throughput
The cable is certified for SATA 6 Gbps operation and is backwards compatible with 3 Gbps and 1.5 Gbps devices. System speed will be limited by the slowest connected component, so a 6 Gbps cable on a 1.5 Gbps controller will run at 1.5 Gbps. Choose this part when the host controller and drive both support the 6 Gbps specification.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 92% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 108779 |
| Product type | Others |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 2 ft (0.61 m) |
| Cable length | 2 ft (0.61 m) |
Questions about this item
How can I confirm the cable is delivering 6 Gbps after connecting it to my SATA 6 Gbps drive and controller?
The system will negotiate the highest speed supported by both ends; with a SATA 6 Gbps drive and controller the link runs at 6 Gbps, and the locking latches on each connector keep the connection secure.
What comes with the Monoprice 108779 and is anything else required to install it?
The box contains the 24-inch SATA 6 Gbps cable with straight locking-latch connectors on both ends; no extra parts are needed for a standard internal drive connection.
Should I choose the 24-inch length or a different size for my build?
The 24-inch length suits typical mid-tower layouts; pick a longer cable only if the drive bay is farther from the motherboard SATA port.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3L-2FT-RD 2 ft SATA cable UV Red
- 2 ft (0.61 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





