Monoprice Inc. 108784 1.5 ft SATA 6Gbps cable Red
A 1.5 ft red SATA cable with locking latches, certified for 6 Gbps data transfer
- Cable length1.5 ft (0.46 m)
- Connector count2
- Product typeOthers
- Product colorRed
- Overall length1.5 ft (0.46 m)
- Supports 6 Gbps transfers with SATA 3.0 certified quality
- Locking latch on both straight connectors prevents accidental disconnects
- 5 ft length keeps internal routing tidy and short
- Red colour simplifies cable identification during builds
- Backwards compatible with 3 Gbps and 1.5 Gbps SATA devices
SATA 6 Gbps internal cable
This 1.5 ft red cable carries the SATA Revision 3.0 specification for up to 6 Gbps transfer rates. It has a straight connector with a locking latch on each end. The cable is certified for maximum speeds when paired with equivalent devices and controllers.
Check connector orientation and device speed
Verify that both the drive and the controller have standard SATA ports for straight connectors. Confirm the slowest component in the chain, as the subsystem will run at the lowest supported rate. The cable is backwards compatible with 3 Gbps and 1.5 Gbps hardware.
Locking latch secures the link in a build
The attached latch on each connector prevents accidental disconnection from vibration or cable routing tension. The short 1.5 ft length reduces clutter inside the chassis. No extra power or adapters are required beyond the SATA data ports.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 92% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 108784 |
| Product type | Others |
| Product color | Red |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 1.5 ft (0.46 m) |
| Cable length | 1.5 ft (0.46 m) |
Questions about this item
Does the 1.5 ft SATA 6Gbps cable include both straight locking connectors or do I need separate drive and motherboard plugs?
The cable has two straight connectors, each with an attached locking latch, so one cable connects the drive and the motherboard without extra parts.
Should I choose the red 1.5 ft length or a different colour or length for a tidy build?
This model is only offered in red at 1.5 ft; other colours or lengths would be a different Monoprice part number.
Will the 6 Gbps rating actually give me 6 Gbps throughput on my SATA 3.0 controller and SSD?
The cable is certified for SATA Revision 3.0 up to 6 Gbps, but the subsystem runs at the speed of the slowest device — controller, drive or cable.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3L-2FT-RD 2 ft SATA cable UV Red
- 2 ft (0.61 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





