Nippon Labs SATA3L-1.5FT-SL 1.5 ft SATA III latching cable, silver
A 1.5 ft SATA III latching cable with silver connectors supports 6 Gb/s speeds and features flexible rubber sleeving
- Cable length1.5 ft (0.46 m)
- Connector count2
- Product typeSATA III
- Product colorSilver
- Overall length1.5 ft (0.46 m)
- Key featuresSupported SATA 6 Gb/s technology Backward compatible with 3
- SATA 6 Gb/s speed for fast data transfers
- Backward compatible with 3 Gb/s and 1.5 Gb/s devices
- Latching connectors prevent accidental disconnection during use
- Flexible rubber sleeving allows tight bends in compact builds
- RoHS compliant materials meet environmental standards
1.5 ft SATA III latching cable
This 1.5 ft SATA III cable connects storage drives or optical units to a motherboard or controller using two latching male connectors. The silver-jacketed cable supports the 6 Gb/s SATA standard and remains backward compatible with 3 Gb/s and 1.5 Gb/s devices. Its flexible rubber sleeving resists kinks during routing inside compact cases.
Replaces loose or non-latching SATA leads
Swap this cable in when an existing lead disconnects under vibration or when a tighter retention mechanism is required for moving systems. The latching design secures each connector without tools, and the 1.5 ft length suits typical drive-to-board runs without excess slack. The jump is worthwhile whenever signal integrity or physical security outweighs the minimal cost difference.
Sustained throughput at 6 Gb/s
Under continuous read or write loads the cable maintains the full SATA 6 Gb/s rate because the shielding and twisted-pair construction limit crosstalk and attenuation over the 1.5 ft span. The rubber sleeve dissipates heat from prolonged data transfer, and the latching ends prevent micro-disconnects that would otherwise throttle performance. RoHS compliant materials ensure consistent electrical characteristics over the product life.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 92% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Nippon Labs |
| Model name | SATA3L-1.5 ft-SL |
| Product type | SATA III |
| Product color | Silver |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 1.5 ft (0.46 m) |
| Cable length | 1.5 ft (0.46 m) |
| Shipping weight | 0.02 kg |
| Package size | 124 × 89 × 24 mm |
Questions about this item
Will the 1.5 ft length reach a drive mounted in a mid-tower case?
At 1.5 ft the cable spans roughly 18 inches, enough for most internal drive bays in a mid-tower chassis.
How do the latching connectors release without damaging the port?
Press the small metal latch tab on each plug before pulling straight out; forcing the cable sideways bends the SATA port pins.
Does the rubber sleeving degrade or need replacement over time?
The sleeving is rated RoHS compliant and designed for the cable's service life; no periodic replacement is required.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3L-2FT-RD 2 ft SATA cable UV Red
- 2 ft (0.61 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





