RIITOP SATA Cable III 4 Pack 6Gbps 20 Inch Red
Four 20-inch SATA III cables with locking latches connect drives at up to 6 Gbps
- Product colorRed
- 6 Gbps SATA III speed for fast file transfers
- Locking latch secures connections to drives and motherboards
- Flexible low-profile jacket fits tight case routing
- Four cables in one pack for spares or RAID builds
- Works with 2.5 SSDs, 3.5 HDDs and optical drives
Four cables for SATA drives
This pack contains four SATA III data cables, each 20 inches long, with red jackets and locking latches. They connect motherboards or host controllers to internal hard drives, SSDs and optical drives. The 6 Gbps rating supports current SATA speeds and is backward compatible with older revisions. No software is required for installation.
Builders adding multiple drives
The four-pack suits system builders who need several internal connections at once or want spares for future upgrades. The low-profile, flexible jacket helps routing in tight cases. Buyers who need external eSATA links or longer internal runs cannot use these cables. The length is fixed at 20 inches and cannot be adjusted.
6 Gbps SATA III interface
The decisive specification is the SATA 3.0 6 Gbps transfer rate, which matches the native speed of modern SATA SSDs and hard drives. Actual throughput will be limited by the slowest connected device. The 7-pin L-type connector with stainless-steel clip ensures a secure fit on all standard SATA ports.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Red |
Questions about this item
Does the 20 inch length affect signal quality when the cable runs near a hot graphics card all day?
The SATA III 6 Gbps rating is maintained across the full 20 inch length; heat from nearby components does not degrade the digital signal.
What must my motherboard provide for these cables to work?
A standard 7-pin SATA data port on the motherboard or host controller is all that is required.
Will the locking latch fit the SATA ports on my ten-year-old hard drive?
Yes, the latch follows the standard SATA L-type key receptacle used on SATA I, II and III drives.
More in SATA & eSATA Drive Cables
Similar items
BENFEI SATA III 6Gbps Cable 3-Pack 18 Inch Blue Locking Latch
- Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Coolgear SS-AZX12MPSS SATA 12" Male-Female Extension Cable (7 Pin) Red
- Sata 7-pin
- SATA





