sakose BYTECC SATA4-POWER Molex to 4 SATA power cable 2-pack
Converts a Molex LP4 connector into four SATA power connectors for up to four drives, two cables per pack
- Connector count5
- Connector details4 Pins Molex Connector to 4 x Serial SATA
- Connector genderMale to Male
- Product typePower
- Product colorBlack
- DetailsSATA4-POWER 4 Pins Molex Connector to 4 Serial ATA Power Cab
- Converts a Molex LP4 connector into four SATA power ports for multiple drives
- Two cables included to support up to eight SATA devices from two Molex sources
- Black 5-connector design with male-to-male terminals for direct PSU-to-device power
- Powers HDDs, ODDs and add-on cards from a single Molex output
- Simplifies RAID builds by expanding limited SATA power connectors on the PSU
BYTECC SATA4-POWER 2-Pack Adapter
This two-pack of black BYTECC SATA4-POWER cables converts each Molex LP4 connector into four SATA power plugs. Each cord carries five connectors in a male-to-male layout. The pair gives eight total SATA power outputs for drives, optical units or add-in cards. Ideal for power supplies lacking native SATA leads.
Suits builders adding multiple SATA devices
Fits systems with spare Molex ports that need to run several hard drives, optical drives or controller cards from one lead. RAID arrays benefit from the consolidated wiring. Not for setups that require native SATA headers from the PSU. Buyers needing right-angle plugs or longer cable runs should look elsewhere.
Molex LP4 to four SATA power per cable
The single specification that decides fit is the 4-pin Molex LP4 input splitting to four serial ATA power outputs on each cord. Verify your power supply has free Molex connectors before buying. No other adapters or voltage conversion is included.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | BYTECC |
| Model name | SATA4-POWER |
| Product type | Power |
| Product color | Black |
| Ports & slots | |
| Connector count | 5 |
| Connector details | 4 Pins Molex Connector to 4 x Serial SATA |
| Connector gender | Male to Male |
Questions about this item
Will the 4-pin Molex end plug into a standard LP4 power-supply connector?
Yes, the male 4-pin Molex connector is built to the LP4 standard and fits any matching female LP4 output on the power supply.
Do I need any tools to attach the four SATA power plugs to my drives?
No tools are required; each SATA power connector is a simple push-fit male plug that seats by hand into the drive’s power port.
If one of the four SATA connectors stops delivering power, can I replace just that lead?
The cable is a single moulded assembly, so an individual lead cannot be swapped; the whole cord would need to be replaced.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000219black-3p SATA III cable 3-pack 18 inch black
- Sata III
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA





