SATACables LP30SR407 SATA cable 16 inch right angle low profile
A 16 inch low-profile SATA cable with a right-angle connector for tight internal routing, supporting 6.0 Gbps data transfer and backwards compatible with 1.5 Gbps devices
- SATA III 6.0 Gbps throughput for fast data transfers
- Low-profile right-angle plug improves airflow inside the case
- Shielded flexible sleeve resists EMI and vibration
- Backwards compatible with SATA 1.5 Gbps devices
- 16-inch length suits notebook and server builds
Right-Angle Low-Profile Design
The SATACables LP30SR407 is a 16 inch internal SATA cable with a straight connector on one end and a right-angle connector on the other. Its low-profile moulding reduces vertical height, making it suitable for tight spaces in notebooks, desktops or server chassis where standard connectors would foul adjacent components or restrict airflow.
Sustained 6 Gbps Throughput
Rated for SATA revision 3.0, the cable supports up to 6.0 Gbps data throughput and remains backward compatible with 1.5 Gbps and 3.0 Gbps devices. Shielded construction with silver meshing protects against EMI and RFI, helping maintain signal integrity during continuous read or write workloads rather than only in short bursts.
Check Connector Orientation and Length
Verify that your motherboard or controller port and the target drive both accept standard SATA data connectors and that a straight-to-right-angle layout matches the physical routing path. Confirm the 16 inch reach is sufficient for your drive placement without stretching or sharp bends that could stress the latch.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.66
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | LP30SR407 |
Questions about this item
Does the LP30SR407 cable generate any heat or noise during continuous use?
The cable is a passive copper assembly with no active components, so it produces no noise and negligible heat even when running all day.
What connector does my motherboard or drive need for this LP30SR407 cable to fit?
The cable requires standard 7-pin SATA ports — one straight and one right-angle — on the host and device.
Will this SATA III cable work with my older SATA 1.5 Gbps hard drive?
Yes, the LP30SR407 is backward compatible with SATA 1.5 Gbps and 3.0 Gbps devices.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
SATACables LP30SR584 SATA cable 23 inch low profile straight to right
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





