SATAGear R-SS-02MRR 8in SATA cable right-angle to right-angle 6.0 Gbps
Connects SATA drives with dual right-angle 7-pin female connectors at 6.0 Gbps
- Right-angle connectors simplify routing in tight cases
- 0 Gbps transfer rate supports high-speed SATA drives
- Narrow shielded cable improves airflow and reduces EMI
- Dual 7-pin female connectors fit standard SATA ports
- Meets SATA 1.0 specification for broad compatibility
Right-angle SATA cable for tight builds
The SATAGear R-SS-02MRR is an 8-inch internal SATA device cable with right-angle connectors on both ends. It links a Serial ATA hard drive or optical drive to a SATA controller in desktops or servers. The dual 7-pin female design suits builders who need a short, angled run between drive and motherboard.
6.0 Gbps headroom for mechanical drives
The cable supports data transfer rates up to 6.0 Gbps, matching the SATA 1.0 standard. That bandwidth is ample for mechanical hard drives and optical drives, which rarely saturate the link. It will not add speed to faster solid-state drives that exceed the interface limit.
Shielded narrow profile aids airflow
A shielded, narrow cable body reduces EMI and RFI while simplifying routing inside a crowded chassis. The slim form leaves more room for air movement compared with wide ribbon cables. No active cooling or power draw is involved.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.67
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | R-SS-02MRR |
Questions about this item
Will the right-angle connectors on this R-SS-02MRR cable clear the SATA ports on my older motherboard?
Both ends use a right-angle 7-pin female design that points downward, so they fit tight spaces around legacy SATA controllers without blocking adjacent ports.
How can I verify the cable is delivering 6.0 Gbps throughput after installation?
Check the negotiated link speed in your BIOS or operating system drive properties; a SATA 6.0 Gbps connection will report 6 Gb/s when the drive and controller both support it.
Does the package include any mounting brackets or extra adapters for a desktop build?
The box contains only the 8-inch shielded SATA cable with dual 7-pin female connectors; no brackets, screws or adapters are supplied.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
SATACables LP30SR584 SATA cable 23 inch low profile straight to right
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





