SATAGear R-SS-075MSR SATA cable 30in straight to right angle
Connects SATA drives at up to 6.0 Gbps with a straight-to-right-angle layout that eases routing and airflow
- Right-angle connector eases tight drive bays
- Narrow 30in cable improves case airflow
- Shielded design guards against EMI/RFI
- 0 Gbps throughput matches SATA 1.0 spec
- Dual 7-pin female ends fit drives and controllers
Straight-to-Right-Angle SATA Cable
This 30-inch internal cable carries a straight 7-pin female connector on one end and a right-angle 7-pin female connector on the other. It links Serial ATA hard drives, optical drives or other SATA devices to a motherboard or controller card. The narrow profile eases routing in desktops or servers that hold multiple drives.
SATA 6.0 Gbps Interface Limit
The cable supports the Serial ATA 1.0 specification and data rates up to 6.0 Gbps. Throughput will not exceed that ceiling, so drives capable of faster protocols will run at this speed. Shielding guards against EMI and RFI to keep signals clean at the maximum rate.
Shielded Narrow Build for Dense Builds
A slim, shielded jacket reduces bulk, improves airflow and simplifies installation in tight drive bays. The right-angle plug points downward to relieve strain on crowded motherboard headers. Dual 7-pin female ends fit standard SATA ports without adapters.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.66
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | R-SS-075MSR |
Questions about this item
Straight-to-right-angle or straight-to-straight — which R-SS-075MSR version do I need?
This model is a straight-to-right-angle cable; choose it when the drive connector faces sideways or downward and a straight plug would foul the case or adjacent cards.
Will the 6.0 Gbps rating actually give me 6.0 Gbps throughput on my SSD?
The cable supports the SATA III 6.0 Gbps signalling rate; real-world throughput depends on the drive and controller, but the cable itself will not bottleneck a SATA III device.
Does the 7-pin SATA connector work with my motherboard's SATA ports?
Yes — both ends are standard 7-pin female SATA connectors, matching the SATA 1.0 specification used on virtually all desktop and server motherboards.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
SATACables LP30SR584 SATA cable 23 inch low profile straight to right
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





