SATAGear SS-01MSL 4in SATA cable straight to left angle
A 4-inch internal SATA cable with a straight connector on one end and a left-angle connector on the other, supporting data rates up to 6.0 Gbps
- Cable length4 in (10.2 cm)
- Left-angled connector eases tight drive bays
- 4-inch length reduces cable clutter inside case
- Narrow profile improves internal airflow
- Shielded design protects against EMI and RFI
- Supports up to 6.0 Gbps data transfer
SATAGear SS-01MSL 4in SATA cable
This internal SATA device cable connects a Serial ATA drive or optical unit to a SATA controller. The 4-inch length suits tight routing inside desktops or servers with multiple drives. Dual 7-pin female connectors provide a direct link for high-speed storage devices.
Straight to left-angle connector layout
The left-angle plug on one end eases insertion beside neighbouring ports or drive cages. A straight plug on the other end fits standard motherboard or controller headers. Narrow cable construction simplifies routing and leaves more room for airflow inside the chassis.
Shielded cable for signal integrity
Shielding protects the link against EMI and RFI during normal operation. The design meets Serial ATA 1.0 standards and supports data rates up to 6.0 Gbps. Passive construction draws no extra power and adds no audible noise to the system.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.64
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | SS-01MSL |
| Size & build | |
| Cable length | 4 in (10.2 cm) |
Questions about this item
Does the 6.0 Gbps rating hold steady when the cable runs at full speed for hours?
The cable meets the SATA 1.0 standard and is shielded against EMI/RFI to maintain signal integrity at 6.0 Gbps during sustained transfers.
Will the shielding and narrow design keep heat and noise low in a packed server chassis?
The narrow profile improves internal airflow and the shielding reduces interference, helping keep temperatures stable without adding audible noise.
Do I need a motherboard with a 7-pin SATA port and a drive with a matching 7-pin connector?
Yes, both ends use 7-pin female connectors, so your controller and device must each provide a standard 7-pin SATA interface.
More in SATA & eSATA Drive Cables
Similar items
SATACables LP30SR584 SATA cable 23 inch low profile straight to right
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





