SATAGear SS-02MSR SATA III cable 8in straight right-angle
Connects a SATA drive to a controller at up to 6.0 Gbps with a straight-to-right-angle layout for tight spaces
- Straight-to-right-angle connectors simplify tight drive bays
- 0 Gbps bandwidth supports fast SATA SSDs and HDDs
- Narrow shielded cable improves airflow and reduces EMI
- Dual 7-pin female ends fit standard SATA ports
- Meets SATA 1.0 specification for broad compatibility
SATA III cable for internal drives
This straight-to-right-angle cable links a Serial ATA device such as a hard drive or optical drive to a SATA controller on the motherboard. It uses dual 7-pin female connectors and suits desktops or servers with multiple drives. Builders who need a left-angle or straight-to-straight layout cannot use this specific orientation.
Practical limits of the SATA 6.0 Gbps interface
The connection supports data rates up to 6.0 Gbps, matching the SATA 1.0 standard cited by the manufacturer. Shielding protects the signal from EMI and RFI inside the chassis. Drives or controllers that require a newer SATA revision will still operate but only at the speed this cable and standard provide.
Narrow shielded build aids routing and airflow
The slim profile reduces cable bulk so routing stays simple even in crowded drive cages. Shielding adds a layer of durability against electromagnetic interference during daily operation. Installers who prefer latch-equipped connectors should verify the retention style before ordering.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.67
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | SS-02MSR |
Questions about this item
Should I choose the straight-to-right-angle or straight-to-straight version?
The SS-02MSR is the straight-to-right-angle model; the right-angle connector helps in tight drive bays where a straight plug would hit the chassis.
What does the 6.0 Gbps figure mean once the cable is installed?
It is the SATA III ceiling; actual throughput depends on the drive and controller, but the cable itself will not limit a 6.0 Gbps link.
Does this cable meet the SATA 1.0 standard or a later revision?
The spec sheet states it meets Serial ATA 1.0 Standards; it is shielded for EMI/RFI protection and uses dual 7-pin female connectors.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
SATACables LP30SR584 SATA cable 23 inch low profile straight to right
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





