SATAGear SS-035RR SATA Cable 14in Right to Right Angle
A 14-inch internal SATA cable with right-angle connectors on both ends supports 6.0 Gbps data rates and a narrow shielded design for improved airflow
- Cable length1.16 ft (0.35 m)
- Right-angled connectors fit tight drive bays
- 14-inch length reaches nearby ports cleanly
- 0 Gbps bandwidth handles fast SSDs
- Shielded cable blocks EMI and RFI noise
- Narrow profile improves case airflow
Right-angle SATA cable for tight builds
The SATAGear SS-035RR is a 14in internal cable with right-angle connectors on both ends. It links a Serial ATA drive or optical unit to a motherboard or controller where straight plugs would foul adjacent components. The 7-pin female sockets lock onto standard SATA ports without adapters.
Thermals noise and power
Passive copper construction adds no heat, noise or power draw to the system. The narrow, shielded jacket reduces electromagnetic interference and leaves more room for air to move past densely packed drives. No active cooling or extra connectors are required.
Build quality and daily use
Shielded conductors meet the Serial ATA 1.0 specification and support signalling up to 6.0 Gbps. The right-to-right orientation keeps the cable flat against the drive and board, easing routing in cramped server or desktop chassis. Dual 7-pin female ends plug directly into host and device ports.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.67
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | SS-035RR |
| Size & build | |
| Cable length | 1.16 ft (0.35 m) |
Questions about this item
How do I install the SS-035RR cable with its right-angle connectors?
Align each 7-pin female connector with the SATA port on the motherboard and the drive, then press straight down until the metal latch clicks. The right-angle shape points the cable downward, so route it before securing the drive to avoid bending the connector.
What maintenance or replacement will this 14in SATA cable need later?
The shielded cable has no moving parts and requires no scheduled maintenance. Replace it only if the latch breaks, the pins bend, or signal errors appear after years of use.
What limit appears first on this cable during sustained 6.0 Gbps transfers?
The 1.16 ft length meets the Serial ATA 1.0 specification, so signal integrity remains within spec. The first practical limit is usually the drive or controller throughput, not the cable itself.
More in SATA & eSATA Drive Cables
Similar items
Darkside DS-0761 10mm SATA cable sleeving 1ft Green
- Green
- Tired of your cable…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
SATACables LP30SR584 SATA cable 23 inch low profile straight to right
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





