SATAGear SS-05MSR SATA cable 20in straight to right angle
Connects SATA drives to a controller at up to 6.0 Gbps with a 20 in straight-to-right-angle shielded cable
- Cable length1.66 ft (0.51 m)
- Straight-to-right-angle connectors simplify tight drive-bay routing
- 20in length reaches drives without excess cable clutter
- Narrow shielded design improves airflow and blocks EMI/RFI
- Supports 6.0 Gbps SATA III transfer rates
- Dual 7-pin female connectors fit standard SATA devices
What the cable connects
This 20-inch SATA cable links a Serial ATA drive or optical unit to a motherboard or controller using dual 7-pin female connectors. The straight-to-right-angle layout suits tight drive bays and crowded server chassis. Builders who need longer reach or external eSATA ports should choose a different cable.
How the right-angle end helps
The right-angle connector reduces strain on the drive port and keeps the cable flat against the PCB, simplifying routing in multi-drive arrays. Shielded construction limits EMI and RFI interference during high-speed transfers. The narrow profile leaves more room for airflow compared with legacy ribbon cables.
Limits of the SATA 1.0 interface
Rated to the SATA 1.0 specification, the cable supports data rates up to 6.0 Gbps, though actual throughput depends on the host controller and drive capabilities. The 1.66 ft length meets internal cabling guidelines but may not span full-tower layouts without slack management. No active signal conditioning is included.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $0.64
- Cheaper than about 99% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | SS-05MSR |
| Size & build | |
| Cable length | 1.66 ft (0.51 m) |
Questions about this item
Will the 7-pin connectors on this 20in cable need replacement over time?
The dual 7-pin female connectors are rated for standard SATA insertion cycles and typically last the life of the drive unless physically damaged.
What throughput ceiling appears first when this cable runs at 6.0 Gbps continuously?
The SATA 1.0-compliant design caps sustained throughput at 6.0 Gbps, so the interface specification is the first limit reached.
Does the narrow 1.66 ft shielded cable run hot or add noise inside a server chassis?
The shielded, narrow profile improves internal airflow and adds no active components, so it produces no noise and negligible heat.
More in SATA & eSATA Drive Cables
Similar items
SATACables LP30SR584 SATA cable 23 inch low profile straight to right
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





