TRENDnet TI-S100 RS232 to RS422/RS485 Data Adapter
Converts an RS232 port to an RS422 or RS485 terminal block for TI-M12 and TI-M42 industrial modbus gateways
- Key features• Convert an RS232 port to an RS422/RS485 terminal block • D
- Product weight0.11
- Converts RS232 to RS422 or RS485 terminal block
- Works with TI-M12 and TI-M42 industrial modbus gateways
- DB9 terminal block adapter for serial port conversion
- Lightweight design at .1100 weight units
- TRENDnet model TI-S100 for reliable data adaptation
TRENDnet TI-S100 RS232 Converter
The TRENDnet TI-S100 converts an RS232 port to an RS422 or RS485 terminal block. It is designed for use with the TI-M12 and TI-M42 industrial Modbus gateways. This data adapter provides a DB9 terminal block interface for serial communication conversion in industrial environments.
Industrial Modbus gateway integration
Engineers integrating TI-M12 or TI-M42 gateways will find this adapter matches the required serial interface. Installations needing direct RS232 cabling without terminal blocks, or those using non-TRENDnet gateway hardware, should verify compatibility before purchase. The adapter serves a specific gateway pairing rather than general-purpose serial conversion.
RS232 to RS422/RS485 terminal block conversion
The single defining specification is the conversion of an RS232 DB9 port into an RS422 or RS485 terminal block connection. This exact interface change determines whether the adapter fits the serial wiring topology of the target industrial Modbus gateway deployment.
How it compares
Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 97% of the 353 comparable items (median $21.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | TRENDnet |
| Model name | TI-S100 |
Questions about this item
Does the TI-S100 draw much power or generate heat when left running continuously?
The adapter is a passive DB9 terminal block converter with no active electronics, so it draws no power and produces no heat during continuous operation.
What existing port or cable must I already have to connect the TI-S100?
You need an available RS232 DB9 serial port on your host device to plug the converter into.
Will the TI-S100 work with legacy RS422 or RS485 equipment I already own?
Yes, it converts the RS232 signal to RS422 or RS485 on the terminal block, allowing direct wiring to older serial devices.
More in Interface & Card Adapters
Similar items
BattleBorn CB-M5SATA-BlackB 4-Pin Molex to 5 SATA data adapter 30cm
- 30 ft (9.14 m)
- Black
BattleBorn CB-M2SATA-BlackB 4-pin Molex to 2 x SATA data adapter 30cm
- 30 ft (9.14 m)
- Black





