Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Soft silicone pad fills gaps between heatsink and component, conducting heat at 1.5 W/m·K across a 200×400×0.5 mm sheet
This silicone pad measures 200mm by 400mm and is 0.5mm thick with a thermal conductivity of 1.5 W/mK. It bridges uneven surfaces between a component and its heatsink to improve heat transfer. The blue material withstands temperatures from 50 to 200 degrees Celsius. It also provides damping and cushioning thanks to its low hardness.
First, clean the component surface thoroughly. Next, peel away the protective plastic film from both sides of the pad. Finally, place the pad where thermal contact is required. The soft silicone compresses well to fill gaps. The main risk is selecting a pad thickness that does not match the specific gap, which reduces thermal performance.
This large sheet suits users who cut their own pads for memory modules, voltage regulators or small chipsets. It is not ideal for buyers who want pre-cut shapes for a specific GPU or CPU block. Anyone needing higher thermal conductivity than 1.5 W/mK should look at alternative materials. The single-sheet pack may not cover multiple large heatsinks.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
After installation, monitor the component temperature under load; a drop toward the expected range shows the 1.5 W/m·K pad is bridging the gap as intended.
The box includes one 200 mm × 400 mm × 0.5 mm blue silicone pad with protective film on both sides; no separate adhesive or additional materials are required.
Choose the 0.5 mm thick pad rated at 1.5 W/m·K; it matches the gap size and provides the specified conductivity for typical heatsink interfaces.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?