Vszerda 1 m Mini SAS 36-pin SFF-8087 to 4 SATA Braided Cable
Connects a controller SFF-8087 port to four SATA drives with 6Gb/s bandwidth and braided strain relief
- Connects controller to four SATA drives via Mini SAS 36-pin SFF-8087
- Supports 6Gb/s bandwidth per drive for high-throughput storage
- Braided nylon sleeve and acetate tape provide strain relief and easy routing
- Low-profile SATA connectors with stainless steel latches resist vibration disconnection
- Compatible with hardware RAID controllers using PCIe 2.0 x8 lanes
Mini SAS breakout cable
This 1 m cable connects a RAID or PCIe controller with an SFF-8087 port to four SATA drives. It suits builders adding direct-attached storage to a server or workstation host bus adapter. The forward breakout design links one host interface to multiple target devices.
6 Gb/s per drive headroom
Each of the four SATA lanes supports up to 6 Gb/s bandwidth for high-throughput arrays. The cable shares performance across two PCIe 2.0 x8 lanes with compatible HBAs. It runs out when a controller lacks an SFF-8087 host port or when drives require a different interface.
Braided strain relief for routing
A woven mesh sheath covers half the length for easy routing inside a chassis. Acetate cloth tape over slim ribbon cables provides strain relief without rigidity. Low-profile SATA connectors feature stainless steel latches to prevent accidental disconnection. P1–P4 markers simplify identification after installation.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will this SFF-8087 breakout cable work with my older 3Ware 9650SE-8LPML controller card?
Yes, the cable is compatible with popular HBA cards such as the 3Ware 9650SE-8LPML and connects the SFF-8087 port to four SATA drives.
How can I verify the 6Gb/s link is active on each drive after installation?
Check the negotiated link speed in your RAID controller BIOS or operating system disk utility; each SATA port should report a 6Gb/s connection.
Does the 1 m braided cable include the four SATA data connectors, or must I buy them separately?
The cable integrates the SFF-8087 male connector and four SATA female connectors in a single assembly; no separate data connectors are required.
More in SATA & eSATA Drive Cables
Similar items
DIXSG 3-pack SATA cable 90° straight to right angle 6Gbps 50cm 18 inch
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III





