Vszerda 4-pack SATA cable double 90° 0.5m
Four double 90-degree SATA data cables, each 0.5 m long, support 6 Gbps transfer and fit 2.5″ and 3.5″ drives
- Four cables included for multi-drive installs
- Double 90° connectors fit tight chassis spaces
- 6 Gbps SATA data rate supports fast drives
- Braided sleeve bundles four runs neatly
- Labelled ends simplify RAID or multi-bay routing
Four-pack 90-degree SATA cables
This set contains four SATA data cables, each 0.5 metres long, with double 90-degree connectors. They link motherboards or host controllers to internal hard drives, SSDs, optical drives and RAID controllers. The cables carry data only and do not supply power to the attached devices.
Braided bundle with labelled ends
A nylon braid holds the four cables together for tidy routing inside tight server or workstation chassis. Each lead is marked P1 to P4, making it simple to trace connections when building RAID arrays or multi-drive storage pools. The half-sleeved construction keeps the group flexible while reducing clutter.
6 Gbps SATA interface ceiling
The cables are rated for 6 Gbps SATA speeds and remain backward compatible with slower SATA revisions. Actual throughput is capped by the slowest connected device or controller, so older drives will not reach the maximum rate. Builders needing longer runs or powered drive connections must source separate cables.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the SATA 7-pin connectors need replacing if the latch tabs break?
The cables use standard SATA 7-pin female connectors rated for 6Gbps; if a latch tab snaps, only that individual cable needs swapping, not the whole set.
What caps the throughput when the 6Gbps link runs continuously?
Sustained speed is limited by the slowest attached drive or controller, so a SATA II SSD will top out at 3Gbps even though the cable supports 6Gbps.
Do the braided 0.5m cables add noticeable heat or noise inside a server chassis?
Passive copper cables generate no noise and negligible heat; the nylon braid only aids routing in tight spaces.
More in SATA & eSATA Drive Cables
Similar items
DIXSG 3-pack SATA cable 90° straight to right angle 6Gbps 50cm 18 inch
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III





