Vszerda 50CM 22 Pin SATA III 6Gbps Data Power to SATA 7pin Molex 4pin Combo Cable Red
A 50 cm combo cable delivers SATA 3.0 6Gbps data and Molex 4-pin power to a 22-pin SATA drive, supporting both 2.5 and 3.5 inch units
- Combines 22-pin data and power in one 50 cm cable
- Supports SATA 3.0 6Gbps bandwidth for fast transfers
- Draws 12V and 5V from a Molex 4-pin connector
- Works with both 2.5" and 3.5" SATA hard drives
- Thin profile reduces clutter and improves case airflow
22-pin SATA data and power cable
This 50 cm combo cable connects a 22-pin SATA drive to a standard 7-pin data port and a Molex 4-pin power connector. It delivers 12 V and 5 V power, supporting both 3.5" and 2.5" SATA hard drives. The thin cable design helps reduce clutter and improve airflow inside the case. Rated for SATA 3.0 6 Gbps bandwidth.
Builders adding SATA drives to Molex power supplies
Suits anyone powering a SATA drive from an existing LP4 connection without upgrading the power supply. Not for builders who need a second cable for multiple drives. Not for systems that require a different power connector or longer reach than 50 cm. Not for drives needing a pure SATA power source.
50 cm length and SATA 3.0 speed
The 50 cm length decides fit in compact or full-size chassis. The SATA 3.0 6 Gbps rating decides maximum data throughput for the connected drive. The 22-pin to 7-pin plus Molex 4-pin layout decides compatibility with your drive and power supply.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 6 Gbps rating mean when the cable is installed in a system?
The 6 Gbps rating matches SATA 3.0 bandwidth, so the link will run at full speed provided the drive and controller also support SATA 3.0.
Which SATA standard does the 7-pin data connector follow, and what throughput limit does it impose?
The 7-pin connector follows SATA 3.0, capping the data path at 6 Gbps when paired with a SATA 3.0 drive and host port.
What clearance and connectors are needed to fit the 22-pin end onto a drive?
The 22-pin plug combines data and power in one narrow block that fits both 2.5 and 3.5 inch SATA drives, requiring only the standard drive connector spacing.
More in SATA & eSATA Drive Cables
Similar items
BENFEI SATA III 6Gbps Cable 3-Pack 18 Inch Blue Locking Latch
- Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Coolgear SS-AZX12MPSS SATA 12" Male-Female Extension Cable (7 Pin) Red
- Sata 7-pin
- SATA





