Vszerda CS0144 SFF-8644 to 4 SATA 3.2 ft cable
Connects an SFF-8644 host port to four SATA drives at up to 6 GB/s over 3.2 ft
- Rated speed6 GB/s
- Connector detailsMini Sas
- Connector genderMale-to-Female
- Conductor typeLead
- Product typeMINI SAS
- Product color3.3 ft (1.01 m)
- Connects HBA card to four SATA drives via SFF-8644 36-pin interface
- Delivers up to 6 GB/s data rate with SAS 2.1 compliance
- Woven mesh sheath and locking latches maintain airflow for 24/7 server operation
- 2 ft length suits compact chassis cable routing
- Universal SATA port compatibility across SSD and HDD targets
Cable purpose and fit
The Vszerda CS0144 connects a host bus adapter with an SFF-8644 port to four SATA drives. It is intended for server or RAID configurations that need a single mini SAS HD link fanned out to individual storage devices. Builders adding SATA SSDs or HDDs to an HBA card will use this cable.
Compatibility checks
Verify that your HBA or RAID controller presents an SFF-8644 36-pin receptacle before ordering. Each target drive must expose a standard SATA 7-pin data port. The cable supports SAS 2.1 signalling up to 6 GB/s, so the controller and drives should operate at that generation for full throughput.
Sustained operation
A woven mesh sheath and locking latches reduce airflow disruption and keep connections secure during continuous 24/7 duty. The assembly follows CineRAID build standards, meaning it is rated for round-the-clock data transfer without the signal degradation seen in lighter-duty fan-out cables.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $28.99
- Pricier than about 88% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | CS0144 |
| Product type | MINI SAS |
| Product color | 3.3 ft (1.01 m) |
| Performance | |
| Rated speed | 6 GB/s |
| Ports & slots | |
| Connector details | Mini Sas |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Lead |
Questions about this item
Does the 3.2 ft cable come with any additional brackets or adapters?
The package contains the SFF-8644 to four SATA 7-pin cable only. No mounting brackets, power adapters or extra cables are included.
The listing shows a single 3.2 ft length; is that the only option available?
This model CS0144 is offered in the 3.2 ft length with a woven mesh sheath and locking latches on each connector.
The headline states 6 GB/s; what throughput should I expect when the cable is connected to a SAS 2.1 HBA and four SATA drives?
The cable is rated for up to 6 GB/s and built to SAS 2.1 compliance, so each of the four SATA lanes can run at the full 6 Gbit/s provided the host controller and drives support that speed.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BUCIER SFF-8087 to 4 SATA Breakout Cable 3.3FT 2Pack
- 6 Gbit/s
- SAS to SATA, Mini S…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





