Vszerda M.2 NGFF SATA to 2.5" SATA converter adapter
Converts an M.2 NGFF SATA SSD into a 2.5-inch SATA drive for PC upgrades
- Connector detailsNgff
- Converts M.2 NGFF SATA SSD to 2.5" SATA
- Works with B-key or B/M-key M.2 sockets only
- Operates without drivers across DOS, Windows 95, 98, XP, 2000, Vista, 7, Linux, Unix
- Powers M.2 SSD at 3.3V input with 3A maximum current
- Compact green PCB measures 3.94 x 3.94 x 0.39 inches
Compatibility & Socket Keying
This adapter connects an M.2 NGFF SATA SSD with a B-key or B/M-key interface to a standard 2.5-inch SATA port. It is designed for specific notebook models including E431, E531, X240, Y410P and Y510P systems using PCI-E 2 lane SSDs. The PCB operates at 3.3V with a maximum input current of 3A.
Who It Suits And Who It Does Not
Builders upgrading compatible laptops listed in the specifications can use this to install an NGFF SATA drive as a bootable system disk without driver installation. It is not suitable for M-key only sockets or drives requiring a different electrical interface. Users with unsupported notebook models should verify their socket keying before purchase.
Deciding Specification
The critical detail is the socket key requirement: the adapter only functions with B-key or B/M-key M.2 slots and explicitly cannot work with M-key only sockets. Confirm your device uses a compatible B-key or B/M-key NGFF SATA SSD before ordering.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Chenyang |
| Model name | CY-SA-123 |
| Ports & slots | |
| Connector details | Ngff |
Questions about this item
What is included with the Vszerda M.2 NGFF SATA converter and do I need any extra cables?
The package contains the green PCB adapter only. You will need a standard 2.5" SATA data cable and a SATA power cable from your system to connect the converted drive.
How do I know which M.2 SSD will work with the CY-SA-123 adapter?
The adapter only accepts B-key or B/M-key M.2 SATA SSDs that run on 3.3 V and draw no more than 3 A. M-key-only modules are not compatible.
Will the 3.3 V, 3 A limit affect the speed of my SSD once installed in a laptop like the X240 or Y510P?
The board does not add any driver overhead or throttle the drive; the SSD runs at its native SATA speed as long as its power draw stays within the 3 A maximum.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000219black-3p SATA III cable 3-pack 18 inch black
- Sata III
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA





