Vszerda Mini SAS-012 SFF-8643 to 4× SFF-8482 breakout cable 3.3 ft with SATA power
Connects a Mini SAS HD SFF-8643 host to four SFF-8482 drives with integrated SATA power at 6 Gb/s per drive
- Rated speed6 GB/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack/Blue
- Overall length3.3
- Key featuresSff-8643 to sff-8482 sas breakout cable with sata power
- Connects one SFF-8643 host to four SFF-8482 drives with integrated SATA power adapters
- 6 Gb/s per drive data rate supports high-throughput storage arrays
- 30 AWG thin braided cable simplifies routing in tight chassis
- 3 ft length fits standard server and workstation layouts
- Labeled connectors speed up installation and cable management
Vszerda Mini SAS-012 breakout cable
This Vszerda Mini SAS-012 cable connects an SFF-8643 host port on a controller or motherboard to four SFF-8482 target drives with integrated SATA power adapters. It serves builders expanding internal storage using SAS or SATA hard drives and SSDs. The 3.3 ft length suits typical chassis routing.
Sustained 6 Gbps per drive over copper
Each of the four lanes delivers up to 6 gigabytes_per_second data transfer using 30 AWG copper conductors. The thin, braided cable construction maintains signal integrity during continuous read or write workloads across all connected drives. SATA power must be attached to every SFF-8482 adapter for operation.
SFF-8643 male host to four SFF-8482 targets
The cable functions only in a forward breakout direction: the SFF-8643 male connector attaches to the controller side, while the four labelled SFF-8482 connectors attach to drives or a backplane. It does not work when the SFF-8643 end is connected to a backplane or target device.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | Mini SAS-012 |
| Product type | Mini-SAS Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Does the 3.3 ft cable run hot or draw extra power during continuous operation?
The copper conductors carry data only; all drive power comes from the separate SATA 15-pin adapters, so the cable itself adds no measurable heat or power draw.
What must already be in the system for the SFF-8643 end to connect and the four SFF-8482 ends to power drives?
You need a controller or motherboard with an internal Mini SAS HD SFF-8643 port, plus a SATA power cable from the PSU for each of the four drive adapters.
Will this breakout work with an older SFF-8087 HBA and 6 Gbps SAS or SATA drives?
The host connector is SFF-8643 male, not SFF-8087, so it plugs directly into a 12 Gbps controller; each target runs at 6 Gbps and accepts both SAS and SATA drives.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Benfei 000221black USB 3.0 to SATA adapter .5 m with 12 V 2 A power supply
- Male
- USB
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





